Recent cars all come with an impressive quantity of options, nevertheless, because of your budget or the year of your Volkswagen California, you may not be lucky enough to have them all. In this article we’re gonna help you correct this problem by showing how to install parking sensor on my Volkswagen California? In fact, this option is very useful, particularly if you live in the city and have to park your car habitually in narrow parking places. To help you out, we’ll first examine how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a Volkswagen California, and to finish, how much does a parking sensor cost?
How does parking sensors operate on an Volkswagen California?
So we commence with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting option will allow you to know the distance between the back of your Volkswagen California and an obstacle when you maneuver. It is consequently specifically good for persons who have to maneuver regularly, whose visibility is bad, or whose vehicle size is huge.
In many cases installed as standard, the reverse sensors of a Volkswagen California include a kit of sensors (minimum 4) that will be activated with reverse gear and will sense obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will examine the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound warning in the cabin which will enhance in intensity with the proximity of the obstacle and in some models a visual marker in complement. The reversing radars of a Volkswagen California will enable you for parking, but as well for safety and keeping away from pedestrians.
How to install parking sensors on a Volkswagen California?
We now move on to the part that you are most likely most interested in, installing reverse parking sensors on a Volkswagen California. This section is for you if you don’t have a standard reserve sensor set up and you still want to take advantage of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Volkswagen California.
How to replace a defective backup sensors on a Volkswagen California
First we’ll see how to replace a defective parking sensor on an Volkswagen California. In cases where your Volkswagen California has suffered a rear collision and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function effectively. Good thing for you this operation is extremely simple, you can even make it out yourself without any specified mechanical skill:
- Get a replacing radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Take off the destroyed parking sensor from your Volkswagen California, this step is very intuitive, it is just clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s working effectively.
- You will simply need to stick to the installation instructions, but we summarize here the main steps.
- Take off the bumper if you don’t have access to the inside of it.
- Think about the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Position your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Test it all out.
- Stick to the installation guidebook which is accessible with some electrical knowledges.
- Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Try it all out.
How to install an aftermarket parking sensor kit on an Volkswagen California
Now we go forward to the section you’re almost certainly most interested in, how to install a reverse sensor set up on a Volkswagen California that doesn’t have one? As we explained earlier on, you’re lucky because a good number of OEMs now deal aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these types in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will surely have to remove the bumper of your Volkswagen California for the installation, do not hesitate to browse our article on this subject matter to discover the process to follow. If you don’t feel like it, you can call a mechanic, the procedure should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Volkswagen California
And to finish, we will now present you the installation of a drill-free parking sensors system on a Volkswagen California. There are two kind, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Volkswagen California?
Price of changing a defective reversing parking sensor for an Volkswagen California
The replacement of a damaged reversing radar will rely upon the model, but the price will vary between 10 and 30 euros per sensor. It is important to count around one hundred euros for the installation of the kit by a mechanic.
Price of an ultrasonic parking sensors with drilling for Volkswagen California
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable system.
Price of a parking sensors kit without drilling for a Volkswagen California
.
To finish, for the price of a reversing radar without drilling for your Volkswagen California, what ever type you choose, you will have to pay between 30 and 60 euros.
To find more tips on the Volkswagen California, take a look at the Volkswagen California category.
