Modern cars all come with an impressive amount of features, nevertheless, by reason of your budget or the year of your Volkswagen Atlas, you may not be sufficiently fortunate to have them all. In this article we’re gonna help you correct this concern by telling you how to install parking sensor on my Volkswagen Atlas? In reality, this option is extremely efficient, especially if you live in the city and have to park regularly in narrow parking spaces. To help you out, we’ll first check out how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Volkswagen Atlas, and finally, how much does a parking sensor cost?

install-parking-sensors-volkswagen-atlas

How does parking sensors work on an Volkswagen Atlas?

So we start with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting option will allow you to know the distance between the back of your Volkswagen Atlas and an obstacle when you maneuver. It is consequently mainly good for drivers who have to maneuver regularly, whose visibility is mediocre, or whose vehicle size is large.
Often installed as standard, the reverse sensors of a Volkswagen Atlas consist of a set of sensors (minimum 4) that will be turned on with reverse gear and will identify obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. In most cases you will have a sound signal in the cabin which will enhance in strength with the closeness of the obstacle and in some models a visual sign in complement. The reversing radars of a Volkswagen Atlas will enable you for parking, but also for safety and staying away from pedestrians.

How to install parking sensors on a Volkswagen Atlas?

We now go forward to the part that you are most likely most focused on, fitting reverse parking sensors on a Volkswagen Atlas. This part is for you if you don’t have a standard reserve sensor set up and you still desire to make use of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Volkswagen Atlas.

How to replace a faulty backup sensors on a Volkswagen Atlas

First we’ll see how to replace a faulty parking sensor on an Volkswagen Atlas. If it turns out your Volkswagen Atlas has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to let the system to function properly. Luckily for you this procedure is particularly simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the destroyed parking sensor from your Volkswagen Atlas, this part is very intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s working properly.
  • How to install an aftermarket parking sensor kit on an Volkswagen Atlas

    Now we advance to the part you’re most likely most focused on, how to install a reverse sensor set up on a Volkswagen Atlas that doesn’t have one? As we said early on, you’re lucky because many of OEMs now offer aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these types in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will surely have to remove the bumper of your Volkswagen Atlas for the installation, do not hesitate to read our article content on this subject to learn the process to follow. If you don’t feel like it, you can call a mechanic, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to follow the installation guidelines, but we summarize here the main steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Think about the ideal placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Volkswagen Atlas

      And finally, we will now present you the installation of a drill-free parking sensors system on a Volkswagen Atlas. There are two types, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take out. This kind of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Stick to the installation manual which is accessible with some electrical knowledges.
      • Determine the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Volkswagen Atlas?

        Price of replacing a faulty reversing parking sensor for an Volkswagen Atlas

        The replacement of a destroyed reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is required to count around one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Volkswagen Atlas

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a good quality package.

        Price of a parking sensors kit without drilling for a Volkswagen Atlas

        .
        At last, for the price of a reversing radar without drilling for your Volkswagen Atlas, no matter what type you select, you will have to pay among 30 and 60 euros.

        To find more tips on the Volkswagen Atlas, take a look at the Volkswagen Atlas category.