Recent cars all come with an astounding amount of options, nevertheless, due to your budget or the year of your Toyota Prius, you may not be fortunate enough to have them all. On this page we’re gonna help you correct this concern by telling you how to install parking sensor on my Toyota Prius? In fact, this option is very helpful, especially if you live in the city and have to park frequently in narrow parking spots. To help you out, we’ll first view how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Toyota Prius, and finally, how much does a parking sensor cost?

install-parking-sensors-toyota-prius

How does parking sensors function on an Toyota Prius?

So we begin with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting option will allow you to know the distance between the back of your Toyota Prius and an obstacle when you move back. It is as a result especially good for persons who have to maneuver frequently, whose visibility is poor, or whose vehicle size is huge.
Often times fitted as standard, the reverse sensors of a Toyota Prius consist of a kit of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will analyze the duration of this journey and determine the distance between the obstacle and the radar. Ordinarily you will have a sound signal in the cabin which will enhance in strength with the proximity of the obstacle and in some cases a visual sign in complement. The reversing radars of a Toyota Prius will enable you for parking, but as well for safety and staying away from pedestrians.

How to install parking sensors on a Toyota Prius?

We now move on to the section that you are most likely most excited about, fitting reverse parking sensors on a Toyota Prius. This part is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy auto aftermarket parking sensors to install yourself on your Toyota Prius.

How to replace a defective backup sensors on a Toyota Prius

First we’ll see how to replace a defective parking sensor on an Toyota Prius. If it turns out your Toyota Prius has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be replaced to allow the system to function properly. Luckily for you this procedure is really simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the destroyed parking sensor from your Toyota Prius, this stage is fairly intuitive, it is just clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating properly.
  • How to install an aftermarket parking sensor kit on an Toyota Prius

    Now we move on to the part you’re probably most excited about, how to install a reverse sensor set up on a Toyota Prius that doesn’t have one? As we mentioned earlier on, you’re lucky because a good number of OEMs now provide auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will surely have to remove the bumper of your Toyota Prius for the set up, do not hesitate to browse our document on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a mechanic, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to stick to the installation guidance, but we summarize here the main procedures.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Toyota Prius

      And finally, we will now present you the installation of a drill-free parking sensors system on a Toyota Prius. There are two sort, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take out. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation manual which is accessible with some electrical bases.
      • Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Toyota Prius?

        Price of swapping a defective reversing parking sensor for an Toyota Prius

        The replacement of a broken reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is essential to count around one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Toyota Prius

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a top quality set up.

        Price of a parking sensors kit without drilling for a Toyota Prius

        .
        To finish, for the price of a reversing radar without drilling for your Toyota Prius, no matter what version you go for, you will have to pay between 30 and 60 euros.

        If you need more tutorials on the Toyota Prius, go to our Toyota Prius category.