Modern cars all come with an impressive amount of technology, nevertheless, resulting from your budget or the year of your Tesla Model X, you may not be lucky enough to have them all. On this page we’re gonna help you solve this trouble by detailing how to install parking sensor on my Tesla Model X? In fact, this feature is extremely profitable, particularly if you live in the city and have to park your car frequently in narrow parking spaces. To help you out, we’ll first check out how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Tesla Model X, and finally, how much does a parking sensor cost?

install-parking-sensors-tesla-model-x

How does parking sensors operate on an Tesla Model X?

So we begin with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature enables you to know the distance between the back of your Tesla Model X and an obstacle when you maneuver. It is as a result especially logical for persons who have to maneuver regularly, whose visibility is bad, or whose vehicle size is large.
Nearly always fitted as standard, the reverse sensors of a Tesla Model X incorporate a set of sensors (minimum 4) that will be turned on with reverse gear and will detect obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and determine the distance between the obstacle and the radar. Ordinarily you will have a sound signal in the cabin which will rise in intensity with the proximity of the obstacle and in some models a visual indicator in complement. The reversing radars of a Tesla Model X will enable you for parking, but as well for security and staying away from pedestrians.

How to install parking sensors on a Tesla Model X?

We now proceed to the part that you are quite likely most interested in, fitting reverse parking sensors on a Tesla Model X. This part is for you if you don’t have a standard reserve sensor set up and you still want to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Tesla Model X.

How to change a broken backup sensors on a Tesla Model X

First we’ll see how to change a broken parking sensor on an Tesla Model X. If it turns out your Tesla Model X has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function effectively. Fortunately for you this process is very simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take off the destroyed parking sensor from your Tesla Model X, this part is extremely intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Tesla Model X

    Now we go forward to the part you’re probably most interested in, how to install a reverse sensor set up on a Tesla Model X that doesn’t have one? As we mentioned above, you’re lucky because many of OEMs now sell auto aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will focus on these models in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will definitely have to remove the bumper of your Tesla Model X for the installation, do not hesitate to read our content page on this subject to learn the method to follow. If you don’t feel like it, you can call a specialist, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to stick to the installation guidance, but we summarize here the main simple steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Reflect on the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Tesla Model X

      And finally, we will now present you the installation of a drill-free parking sensors system on a Tesla Model X. There are two options, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take out. This sort of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Adhere to the installation manual which is accessible with some electrical bases.
      • Determine the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Tesla Model X?

        Price of changing a broken reversing parking sensor for an Tesla Model X

        The replacement of a broken reversing radar will rely upon the model, but the price will vary between 10 and 30 euros per sensor. It is important to count around one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Tesla Model X

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a top quality package.

        Price of a parking sensors kit without drilling for a Tesla Model X

        .
        To conclude, for the price of a reversing radar without drilling for your Tesla Model X, no matter what version you select, you will have to pay among 30 and 60 euros.

        To find more tips on the Tesla Model X, take a look at the Tesla Model X category.