Recent cars all come with an incredible amount of features, nevertheless, by reason of your budget or the year of your Tesla Model S, you may not be fortunate enough to have them all. In this article we’re going to help you correct this problem by telling you how to install parking sensor on my Tesla Model S? In fact, this feature is very efficient, especially if you live in the city and have to park regularly in narrow parking spots. To help you out, we’ll first examine how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Tesla Model S, and to finish, how much does a parking sensor cost?


How does parking sensors function on an Tesla Model S?

So we start with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting feature enables you to know the distance between the back of your Tesla Model S and an obstacle when you maneuver. It is as a result mainly legitimate for persons who have to maneuver frequently, whose visibility is poor, or whose vehicle size is huge.
Often times fitted as standard, the reverse sensors of a Tesla Model S is made up of a set of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will analyze the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound indicator in the cabin which will enhance in intensity with the closeness of the obstacle and in some models a visual indicator in complement. The reversing radars of a Tesla Model S will help you for parking, but also for security and keeping away from pedestrians.

How to install parking sensors on a Tesla Model S?

We now proceed to the section that you are likely most excited about, installing reverse parking sensors on a Tesla Model S. This part is for you if you don’t have a standard reserve sensor set up and you still desire to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Tesla Model S.

How to replace a broken backup sensors on a Tesla Model S

First we’ll see how to replace a broken parking sensor on an Tesla Model S. If it turns out your Tesla Model S has suffered a rear collision and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function properly. Good thing for you this operation is particularly simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take off the damaged parking sensor from your Tesla Model S, this stage is fairly intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning properly.
  • How to install an aftermarket parking sensor kit on an Tesla Model S

    Now we go forward to the part you’re almost certainly most excited about, how to install a reverse sensor set up on a Tesla Model S that doesn’t have one? As we said earlier, you’re lucky because a good number of OEMs now sell automotive aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will look at these types in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will certainly have to remove the bumper of your Tesla Model S for the set up, do not be reluctant to read our document on this subject matter to learn the method to follow. If you don’t feel like it, you can call a specialist, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to adhere to the installation guidelines, but we summarize here the main guidelines.
    • Take off the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Tesla Model S

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Tesla Model S. There are two options, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Stick to the installation manual which is accessible with some electrical knowledges.
      • Identify the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Tesla Model S?

        Price of changing a broken reversing parking sensor for an Tesla Model S

        The replacement of a damaged reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is essential to count approximately one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Tesla Model S

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a good quality package.

        Price of a parking sensors kit without drilling for a Tesla Model S

        Finally, for the price of a reversing radar without drilling for your Tesla Model S, what ever type you go for, you will have to pay among 30 and 60 euros.

        If you want more tutorials on the Tesla Model S, go to our Tesla Model S category.