Modern cars all come with an impressive quantity of technology, however, because of your budget or the year of your Suzuki Vitara, you may not be fortunate enough to have them all. In this article we’re gonna help you correct this trouble by explaining how to install parking sensor on my Suzuki Vitara? In fact, this feature is extremely practical, especially if you live in the city and have to park often in narrow parking spots. To help you out, we’ll first examine how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Suzuki Vitara, and at last, how much does a parking sensor cost?

install-parking-sensors-suzuki-vitara

How does parking sensors operate on an Suzuki Vitara?

So we start with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting feature permits you to know the distance between the back of your Suzuki Vitara and an obstacle when you move back. It is as a consequence specifically legitimate for people who have to maneuver frequently, whose field of vision is poor, or whose vehicle size is huge.
Often installed as standard, the reverse sensors of a Suzuki Vitara include a kit of sensors (minimum 4) that will be turned on with reverse gear and will locate obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound indicator in the cabin which will enhance in intensity with the proximity of the obstacle and sometimes a visual indicator in complement. The reversing radars of a Suzuki Vitara will help you for parking, but also for safety and staying away from pedestrians.

How to install parking sensors on a Suzuki Vitara?

We now proceed to the part that you are quite likely most interested in, fitting reverse parking sensors on a Suzuki Vitara. This section is for you if you don’t have a standard reserve sensor set up and you still desire to make use of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Suzuki Vitara.

How to change a defective backup sensors on a Suzuki Vitara

First we’ll see how to change a defective parking sensor on an Suzuki Vitara. If it turns out your Suzuki Vitara has suffered a rear shock and one of the sensors of your reversing radar has been destroyed, it will have to be swapped out to let the system to function effectively. Good thing for you this procedure is extremely simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take off the damaged parking sensor from your Suzuki Vitara, this stage is extremely intuitive, it is only clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s working effectively.
  • How to install an aftermarket parking sensor kit on an Suzuki Vitara

    Now we go forward to the section you’re likely most interested in, how to install a reverse sensor set up on a Suzuki Vitara that doesn’t have one? As we revealed earlier, you’re lucky because a good number of OEMs now provide automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this section. It is necessary to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will surely have to remove the bumper of your Suzuki Vitara for the set up, do not hesitate to read our content on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a professional, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to follow the installation instructions, but we summarize here the main guidelines.
    • Take off the bumper if you don’t have access to the inside of it.
    • Reflect on the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Suzuki Vitara

      And at last, we will now present you the installation of a drill-free parking sensors system on a Suzuki Vitara. There are two options, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take out. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation instructions which is accessible with some electrical knowledges.
      • Identify the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Suzuki Vitara?

        Price of swapping a defective reversing parking sensor for an Suzuki Vitara

        The replacement of a destroyed reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is essential to count about one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Suzuki Vitara

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable set up.

        Price of a parking sensors kit without drilling for a Suzuki Vitara

        .
        To conclude, for the price of a reversing radar without drilling for your Suzuki Vitara, what ever version you select, you will have to spend between 30 and 60 euros.

        If you need more guides on the Suzuki Vitara, go to our Suzuki Vitara category.