Modern cars all come with an astounding amount of options, however, because of your budget or the year of your Suzuki Swift, you may not be fortunate enough to have them all. On this page we’re gonna help you resolve this problem by explaining how to install parking sensor on my Suzuki Swift? In fact, this feature is very useful, especially if you live in the city and have to park regularly in narrow parking areas. To help you out, we’ll first check out how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Suzuki Swift, and to finish, how much does a parking sensor cost?

install-parking-sensors-suzuki-swift

How does parking sensors work on an Suzuki Swift?

So we commence with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting feature enables you to know the distance between the back of your Suzuki Swift and an obstacle when you maneuver. It is as a result mainly legitimate for drivers who have to maneuver regularly, whose visibility is mediocre, or whose car size is big.
Nearly always fitted as standard, the reverse sensors of a Suzuki Swift is made up of a kit of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. Generally you will have a sound signal in the cabin which will increase in strength with the proximity of the obstacle and in some cases a visual marker in complement. The reversing radars of a Suzuki Swift will help you for parking, but as well for safety and avoiding pedestrians.

How to install parking sensors on a Suzuki Swift?

We now advance to the part that you are quite likely most excited about, installing reverse parking sensors on a Suzuki Swift. This section is for you if you don’t have a standard reserve sensor set up and you still desire to make use of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Suzuki Swift.

How to change a broken backup sensors on a Suzuki Swift

First we’ll see how to change a broken parking sensor on an Suzuki Swift. If your Suzuki Swift has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be replaced to allow the system to function properly. Luckily for you this operation is really simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take out the malfunctioned parking sensor from your Suzuki Swift, this step is extremely intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning properly.
  • How to install an aftermarket parking sensor kit on an Suzuki Swift

    Now we proceed to the section you’re probably most excited about, how to install a reverse sensor set up on a Suzuki Swift that doesn’t have one? As we explained early on, you’re lucky because many of OEMs now deal aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these types in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will definitely have to remove the bumper of your Suzuki Swift for the set up, do not hesitate to read our document on this subject to discover the method to follow. If you don’t feel like it, you can call a mechanic, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to stick to the installation recommendations, but we summarize here the main simple steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Suzuki Swift

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Suzuki Swift. There are two options, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Stick to the installation owners manual which is accessible with some electrical knowledges.
      • Locate the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Suzuki Swift?

        Price of swapping a broken reversing parking sensor for an Suzuki Swift

        The replacement of a broken reversing radar will rely upon the model, but the price will vary between 10 and 30 euros per sensor. It is necessary to count around one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Suzuki Swift

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high quality set up.

        Price of a parking sensors kit without drilling for a Suzuki Swift

        .
        Finally, for the price of a reversing radar without drilling for your Suzuki Swift, no matter what type you select, you will have to pay among 30 and 60 euros.

        If you have any further questions about the Suzuki Swift, do not hesitate to consult our Suzuki Swift category.