Modern cars all come with an impressive amount of features, nevertheless, due to your budget or the year of your Subaru Impreza, you may not be sufficiently fortunate to have them all. Today we’re going to help you correct this situation by telling you how to install parking sensor on my Subaru Impreza? Indeed, this option is highly helpful, particularly if you live in the city and have to park your car often in narrow parking places. To help you out, we’ll first check out how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Subaru Impreza, and to conclude, how much does a parking sensor cost?

install-parking-sensors-subaru-impreza

How does parking sensors work on an Subaru Impreza?

So we begin with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting option will allow you to know the distance between the back of your Subaru Impreza and an obstacle when you maneuver. It is as a result extremely good for drivers who have to maneuver on a regular basis, whose visibility is mediocre, or whose vehicle size is big.
Often times fitted as standard, the reverse sensors of a Subaru Impreza consist of a kit of sensors (minimum 4) that will be turned on with reverse gear and will locate obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. In general you will have a sound indicator in the cabin which will increase in intensity with the closeness of the obstacle and in some cases a visual marker in complement. The reversing radars of a Subaru Impreza will enable you for parking, but as well for security and avoiding pedestrians.

How to install parking sensors on a Subaru Impreza?

We now advance to the part that you are probably most intrigued by, installing reverse parking sensors on a Subaru Impreza. This section is for you if you don’t have a standard reserve sensor set up and you still want to take advantage of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Subaru Impreza.

How to replace a damaged backup sensors on a Subaru Impreza

First we’ll see how to replace a damaged parking sensor on an Subaru Impreza. If your Subaru Impreza has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function effectively. Fortunately for you this process is particularly simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the malfunctioned parking sensor from your Subaru Impreza, this part is extremely intuitive, it is just clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Subaru Impreza

    Now we proceed to the section you’re most certainly most intrigued by, how to install a reverse sensor set up on a Subaru Impreza that doesn’t have one? As we mentioned earlier, you’re lucky because many of OEMs now sell aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will focus on these versions in this section. It is imperative to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Subaru Impreza for the set up, do not be reluctant to consult our article on this subject to learn the procedure to follow. If you don’t feel like it, you can call a mechanic, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to adhere to the installation instructions, but we summarize here the main guidelines.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Subaru Impreza

      And to conclude, we will now present you the installation of a drill-free parking sensors system on a Subaru Impreza. There are two types, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation instructions which is accessible with some electrical knowledges.
      • Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Subaru Impreza?

        Price of swapping a damaged reversing parking sensor for an Subaru Impreza

        The replacement of a broken reversing radar will rely upon the model, but the price will vary between 10 and 30 euros per sensor. It is essential to count approximately one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Subaru Impreza

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a reliable system.

        Price of a parking sensors kit without drilling for a Subaru Impreza

        .
        Finally, for the price of a reversing radar without drilling for your Subaru Impreza, whatever version you choose, you will have to pay between 30 and 60 euros.

        If perhaps you have any further questions about the Subaru Impreza, do not hesitate to consult our Subaru Impreza category.