Modern cars all come with an impressive number of options, however, resulting from your budget or the year of your saab 9 3, you may not be lucky enough to have them all. In this article we’re going to help you resolve this trouble by explaining how to install parking sensor on my saab 9 3? In reality, this option is highly useful, particularly if you live in the city and have to park your car regularly in narrow parking places. To help you out, we’ll first examine how parking sensors work, then we’ll check out how to install a parking reverse sensor on a saab 9 3, and finally, how much does a parking sensor cost?
How does parking sensors function on an saab 9 3?
So we commence with the functioning of a parking sensor. As we told you in the intro, this particularl interesting option enables you to know the distance between the back of your saab 9 3 and an obstacle when you move back. It is as a consequence mainly logical for drivers who have to maneuver frequently, whose visibility is awful, or whose car size is big.
Often fitted as standard, the reverse sensors of a saab 9 3 is made up of a set of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and calculate the distance between the obstacle and the radar. Ordinarily you will have a sound signal in the cabin which will increase in intensity with the closeness of the obstacle and sometimes a visual indicator in complement. The reversing radars of a saab 9 3 will enable you for parking, but also for safety and staying away from pedestrians.
How to install parking sensors on a saab 9 3?
We now go forward to the step that you are most likely most excited about, fitting reverse parking sensors on a saab 9 3. This part is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your saab 9 3.
How to replace a malfunctioning backup sensors on a saab 9 3
First we’ll see how to replace a malfunctioning parking sensor on an saab 9 3. In cases where your saab 9 3 has suffered a rear impact and one of the sensors of your reversing radar has been destroyed, it will have to be swapped out to allow the system to function effectively. Thankfully for you this procedure is very simple, you can even carry it out yourself without any particular mechanical skill:
- Get a replacement unit radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Remove the damaged parking sensor from your saab 9 3, this stage is extremely intuitive, it is just clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating effectively.
- You will simply need to stick to the installation guidelines, but we summarize here the main procedures.
- Remove the bumper if you don’t have access to the inside of it.
- Think about the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Give it a try all out.
- Stick to the installation manual which is accessible with some electrical bases.
- Determine the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Test it all out.
How to install an aftermarket parking sensor kit on an saab 9 3
Now we move on to the part you’re probably most excited about, how to install a reverse sensor set up on a saab 9 3 that doesn’t have one? As we said above, you’re lucky because a good number of OEMs now sell automotive aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this section. It is required to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will definitely have to remove the bumper of your saab 9 3 for the set up, do not hesitate to read our document on this subject to discover the procedure to follow. If you don’t feel like it, you can call a professional, the procedure should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a saab 9 3
And finally, we will now present you the installation of a drill-free parking sensors system on a saab 9 3. There are two options, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to remove. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a saab 9 3?
Price of changing a malfunctioning reversing parking sensor for an saab 9 3
The replacement of a destroyed reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is important to count around one hundred euros for the installation of the kit by a professional.
Price of an ultrasonic parking sensors with drilling for saab 9 3
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a top quality kit.
Price of a parking sensors kit without drilling for a saab 9 3
.
To conclude, for the price of a reversing radar without drilling for your saab 9 3, no matter what type you go for, you will have to spend among 30 and 60 euros.
If you want more tutorials on the saab 9 3, go to our saab 9 3 category.
