Modern cars all come with an incredible number of technology, however, due to your budget or the year of your Renault Vel Satis, you may not be lucky enough to have them all. On this page we’re going to help you resolve this issue by detailing how to install parking sensor on my Renault Vel Satis? Indeed, this option is very efficient, especially if you live in the city and have to park regularly in narrow parking spaces. To help you out, we’ll first check out how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Renault Vel Satis, and finally, how much does a parking sensor cost?

install-parking-sensors-renault-vel-satis

How does parking sensors function on an Renault Vel Satis?

So we commence with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting option will allow you to know the distance between the back of your Renault Vel Satis and an obstacle when you move back. It is consequently extremely honest for people who have to maneuver frequently, whose visibility is poor, or whose car size is large.
Frequently installed as standard, the reverse sensors of a Renault Vel Satis is made up of a set of sensors (minimum 4) that will be turned on with reverse gear and will sense obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. Ordinarily you will have a sound warning in the cabin which will rise in intensity with the proximity of the obstacle and in some cases a visual indicator in complement. The reversing radars of a Renault Vel Satis will enable you for parking, but also for safety and keeping away from pedestrians.

How to install parking sensors on a Renault Vel Satis?

We now move on to the section that you are most certainly most intrigued by, installing reverse parking sensors on a Renault Vel Satis. This part is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Renault Vel Satis.

How to replace a faulty backup sensors on a Renault Vel Satis

First we’ll see how to replace a faulty parking sensor on an Renault Vel Satis. In cases where your Renault Vel Satis has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be replaced to let the system to function correctly. Good thing for you this operation is really simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take out the damaged parking sensor from your Renault Vel Satis, this part is very intuitive, it is just clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating correctly.
  • How to install an aftermarket parking sensor kit on an Renault Vel Satis

    Now we go forward to the part you’re likely most intrigued by, how to install a reverse sensor set up on a Renault Vel Satis that doesn’t have one? As we revealed early on, you’re lucky because a good number of OEMs now provide automotive aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these versions in this section. It is imperative to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will certainly have to remove the bumper of your Renault Vel Satis for the set up, do not hesitate to browse our content on this subject to discover the process to follow. If you don’t feel like it, you can call a mechanic, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to stick to the installation guidelines, but we summarize here the main basic steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Think about the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Renault Vel Satis

      And finally, we will now present you the installation of a drill-free parking sensors system on a Renault Vel Satis. There are two sort, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation guidebook which is accessible with some electrical bases.
      • Find the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Renault Vel Satis?

        Price of swapping a faulty reversing parking sensor for an Renault Vel Satis

        The replacement of a broken reversing radar will rely upon the model, but the price will vary between 10 and 30 euros per sensor. It is essential to count around one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Renault Vel Satis

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high class system.

        Price of a parking sensors kit without drilling for a Renault Vel Satis

        .
        At last, for the price of a reversing radar without drilling for your Renault Vel Satis, what ever type you choose, you will have to spend among 30 and 60 euros.

        To get more tips on the Renault Vel Satis, take a look at the Renault Vel Satis category.