Modern cars all come with an astounding quantity of features, but, because of your budget or the year of your Renault Megane, you may not be sufficiently fortunate to have them all. In this article we’re gonna help you resolve this problem by showing how to install parking sensor on my Renault Megane? In fact, this feature is very handy, especially if you live in the city and have to park often in narrow parking areas. To help you out, we’ll first take a look at how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Renault Megane, and finally, how much does a parking sensor cost?

install-parking-sensors-renault-megane

How does parking sensors function on an Renault Megane?

So we commence with the functioning of a parking sensor. As we told you in the intro, this particularl interesting feature permits you to know the distance between the back of your Renault Megane and an obstacle when you maneuver. It is therefore particularly good for people who have to maneuver frequently, whose visibility is mediocre, or whose car size is large.
Often fitted as standard, the reverse sensors of a Renault Megane consist of a set of sensors (minimum 4) that will be activated with reverse gear and will sense obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and determine the distance between the obstacle and the radar. In general you will have a sound indicator in the cabin which will enhance in strength with the proximity of the obstacle and sometimes a visual marker in complement. The reversing radars of a Renault Megane will enable you for parking, but as well for safety and avoiding pedestrians.

How to install parking sensors on a Renault Megane?

We now proceed to the step that you are most likely most excited about, installing reverse parking sensors on a Renault Megane. This part is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Renault Megane.

How to replace a defective backup sensors on a Renault Megane

First we’ll see how to replace a defective parking sensor on an Renault Megane. In cases where your Renault Megane has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to allow the system to function effectively. Thankfully for you this process is really simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take off the broken parking sensor from your Renault Megane, this step is very intuitive, it is simply clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Renault Megane

    Now we proceed to the part you’re most certainly most excited about, how to install a reverse sensor set up on a Renault Megane that doesn’t have one? As we explained earlier on, you’re lucky because many of OEMs now provide automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this part. It is imperative to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Renault Megane for the set up, do not be reluctant to read our document on this subject to learn the process to follow. If you don’t feel like it, you can call a professional, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to adhere to the installation guidance, but we summarize here the main guidelines.
    • Take off the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Give it a try all out.
    • Install a parking sensor without drilling on a Renault Megane

      And finally, we will now present you the installation of a drill-free parking sensors system on a Renault Megane. There are two sort, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to remove. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation guidebook which is accessible with some electrical bases.
      • Identify the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Renault Megane?

        Price of replacing a defective reversing parking sensor for an Renault Megane

        The replacement of a destroyed reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is required to count around one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Renault Megane

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a top quality set up.

        Price of a parking sensors kit without drilling for a Renault Megane

        .
        At last, for the price of a reversing radar without drilling for your Renault Megane, no matter what type you go for, you will have to pay between 30 and 60 euros.

        To find more tips on the Renault Megane, take a look at the Renault Megane category.