Recent cars all come with an astounding quantity of options, but, by reason of your budget or the year of your Renault Megane 4, you may not be sufficiently fortunate to have them all. Today we’re going to help you correct this concern by detailing how to install parking sensor on my Renault Megane 4? In reality, this option is very useful, especially if you live in the city and have to park your car habitually in narrow parking spaces. To help you out, we’ll first examine how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Renault Megane 4, and finally, how much does a parking sensor cost?

install-parking-sensors-renault-megane-4

How does parking sensors function on an Renault Megane 4?

So we begin with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting option allows you to know the distance between the back of your Renault Megane 4 and an obstacle when you maneuver. It is consequently mainly logical for persons who have to maneuver regularly, whose visibility is bad, or whose vehicle size is large.
Often installed as standard, the reverse sensors of a Renault Megane 4 is made up of a set of sensors (minimum 4) that will be activated with reverse gear and will detect obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and estimate the distance between the obstacle and the radar. Ordinarily you will have a sound warning in the cabin which will rise in strength with the closeness of the obstacle and sometimes a visual marker in complement. The reversing radars of a Renault Megane 4 will enable you for parking, but also for security and staying away from pedestrians.

How to install parking sensors on a Renault Megane 4?

We now advance to the part that you are most certainly most excited about, fitting reverse parking sensors on a Renault Megane 4. This part is for you if you don’t have a standard reserve sensor set up and you still wish to take advantage of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Renault Megane 4.

How to replace a defective backup sensors on a Renault Megane 4

First we’ll see how to replace a defective parking sensor on an Renault Megane 4. In the event that your Renault Megane 4 has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function correctly. Thankfully for you this process is particularly simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the damaged parking sensor from your Renault Megane 4, this step is fairly intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating correctly.
  • How to install an aftermarket parking sensor kit on an Renault Megane 4

    Now we go forward to the part you’re almost certainly most excited about, how to install a reverse sensor set up on a Renault Megane 4 that doesn’t have one? As we explained earlier, you’re lucky because a good number of OEMs now offer auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this part. It is important to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will definitely have to remove the bumper of your Renault Megane 4 for the set up, do not hesitate to browse our document on this subject matter to discover the method to follow. If you don’t feel like it, you can call a workshop, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to follow the installation guidelines, but we summarize here the main basic steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Think about the ideal location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Renault Megane 4

      And finally, we will now present you the installation of a drill-free parking sensors system on a Renault Megane 4. There are two sort, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to remove. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation owners manual which is accessible with some electrical knowledges.
      • Identify the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Renault Megane 4?

        Price of replacing a defective reversing parking sensor for an Renault Megane 4

        The replacement of a broken reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is required to count around one hundred euros for the installation of the kit by a workshop.

        Price of an ultrasonic parking sensors with drilling for Renault Megane 4

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a good quality package.

        Price of a parking sensors kit without drilling for a Renault Megane 4

        .
        To finish, for the price of a reversing radar without drilling for your Renault Megane 4, no matter what type you choose, you will have to pay among 30 and 60 euros.

        If you need more tutorials on the Renault Megane 4, go to our Renault Megane 4 category.