Modern cars all come with an impressive quantity of technology, but, by reason of your budget or the year of your Renault Kangoo 2, you may not be sufficiently lucky to have them all. In this article we’re gonna help you solve this concern by explaining how to install parking sensor on my Renault Kangoo 2? In fact, this feature is very useful, particularly if you live in the city and have to park your car on the regular basis in narrow parking spaces. To help you out, we’ll first check out how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Renault Kangoo 2, and finally, how much does a parking sensor cost?

install-parking-sensors-renault-kangoo-2

How does parking sensors function on an Renault Kangoo 2?

So we begin with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting feature will allow you to know the distance between the back of your Renault Kangoo 2 and an obstacle when you maneuver. It is therefore particularly honest for people who have to maneuver on a regular basis, whose field of vision is awful, or whose car size is large.
Nearly always installed as standard, the reverse sensors of a Renault Kangoo 2 incorporate a set of sensors (minimum 4) that will be activated with reverse gear and will sense obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and estimate the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will enhance in level with the closeness of the obstacle and in some models a visual marker in complement. The reversing radars of a Renault Kangoo 2 will enable you for parking, but as well for safety and keeping away from pedestrians.

How to install parking sensors on a Renault Kangoo 2?

We now proceed to the part that you are probably most focused on, fitting reverse parking sensors on a Renault Kangoo 2. This section is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Renault Kangoo 2.

How to replace a damaged backup sensors on a Renault Kangoo 2

First we’ll see how to replace a damaged parking sensor on an Renault Kangoo 2. If your Renault Kangoo 2 has suffered a rear collision and one of the sensors of your reversing radar has been damaged, it will have to be replaced to allow the system to function properly. Good thing for you this procedure is extremely simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take out the malfunctioned parking sensor from your Renault Kangoo 2, this part is fairly intuitive, it is just clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning properly.
  • How to install an aftermarket parking sensor kit on an Renault Kangoo 2

    Now we advance to the section you’re likely most focused on, how to install a reverse sensor set up on a Renault Kangoo 2 that doesn’t have one? As we explained above, you’re lucky because many of OEMs now deal aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will surely have to remove the bumper of your Renault Kangoo 2 for the set up, do not hesitate to consult our article content on this subject matter to discover the process to follow. If you don’t feel like it, you can call a specialist, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to adhere to the installation recommendations, but we summarize here the main basic steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Renault Kangoo 2

      And finally, we will now present you the installation of a drill-free parking sensors system on a Renault Kangoo 2. There are two sort, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take out. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Stick to the installation owners manual which is accessible with some electrical knowledges.
      • Locate the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Renault Kangoo 2?

        Price of swapping a damaged reversing parking sensor for an Renault Kangoo 2

        The replacement of a damaged reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is necessary to count about one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Renault Kangoo 2

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a top quality package.

        Price of a parking sensors kit without drilling for a Renault Kangoo 2

        .
        To finish, for the price of a reversing radar without drilling for your Renault Kangoo 2, whatever version you go for, you will have to spend between 30 and 60 euros.

        If you wish more tutorials on the Renault Kangoo 2, go to our Renault Kangoo 2 category.