Recent cars all come with an impressive amount of technology, but, due to your budget or the year of your Renault Clio 4, you may not be lucky enough to have them all. In this article we’re going to help you correct this situation by telling you how to install parking sensor on my Renault Clio 4? Indeed, this option is very efficient, especially if you live in the city and have to park your car regularly in narrow parking spots. To help you out, we’ll first check out how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a Renault Clio 4, and to conclude, how much does a parking sensor cost?

install-parking-sensors-renault-clio-4

How does parking sensors operate on an Renault Clio 4?

So we start with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting option allows you to know the distance between the back of your Renault Clio 4 and an obstacle when you maneuver. It is consequently specifically legitimate for persons who have to maneuver regularly, whose visibility is bad, or whose vehicle size is big.
Often installed as standard, the reverse sensors of a Renault Clio 4 consist of a kit of sensors (minimum 4) that will be turned on with reverse gear and will identify obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. Ordinarily you will have a sound warning in the cabin which will enhance in strength with the proximity of the obstacle and sometimes a visual marker in complement. The reversing radars of a Renault Clio 4 will help you for parking, but also for security and keeping away from pedestrians.

How to install parking sensors on a Renault Clio 4?

We now advance to the step that you are quite likely most excited about, fitting reverse parking sensors on a Renault Clio 4. This section is for you if you don’t have a standard reserve sensor set up and you still want to take advantage of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Renault Clio 4.

How to replace a defective backup sensors on a Renault Clio 4

First we’ll see how to replace a defective parking sensor on an Renault Clio 4. In the event that your Renault Clio 4 has suffered a rear collision and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to allow the system to function properly. Luckily for you this operation is particularly simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take out the damaged parking sensor from your Renault Clio 4, this step is fairly intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating properly.
  • How to install an aftermarket parking sensor kit on an Renault Clio 4

    Now we advance to the section you’re likely most excited about, how to install a reverse sensor set up on a Renault Clio 4 that doesn’t have one? As we explained above, you’re lucky because a good number of OEMs now offer auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will surely have to remove the bumper of your Renault Clio 4 for the set up, do not be reluctant to browse our document on this subject matter to discover the method to follow. If you don’t feel like it, you can call a specialist, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to adhere to the installation guidance, but we summarize here the main basic steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Renault Clio 4

      And to conclude, we will now present you the installation of a drill-free parking sensors system on a Renault Clio 4. There are two sort, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Stick to the installation guidebook which is accessible with some electrical bases.
      • Locate the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Renault Clio 4?

        Price of swapping a defective reversing parking sensor for an Renault Clio 4

        The replacement of a damaged reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is important to count approximately one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Renault Clio 4

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable package.

        Price of a parking sensors kit without drilling for a Renault Clio 4

        .
        To finish, for the price of a reversing radar without drilling for your Renault Clio 4, no matter what type you select, you will have to spend among 30 and 60 euros.

        In the event that you have any additional questions about the Renault Clio 4, do not hesitate to consult our Renault Clio 4 category.