Modern cars all come with an incredible number of features, however, because of your budget or the year of your Ram ProMaster, you may not be sufficiently lucky to have them all. Today we’re gonna help you solve this problem by detailing how to install parking sensor on my Ram ProMaster? Indeed, this feature is highly profitable, particularly if you live in the city and have to park your car frequently in narrow parking spaces. To help you out, we’ll first take a look at how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a Ram ProMaster, and at last, how much does a parking sensor cost?

install-parking-sensors-ram-promaster

How does parking sensors work on an Ram ProMaster?

So we begin with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting feature will allow you to know the distance between the back of your Ram ProMaster and an obstacle when you move back. It is consequently mainly honest for persons who have to maneuver often, whose visibility is awful, or whose car size is large.
Often times fitted as standard, the reverse sensors of a Ram ProMaster include a kit of sensors (minimum 4) that will be turned on with reverse gear and will sense obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and determine the distance between the obstacle and the radar. In most cases you will have a sound signal in the cabin which will increase in intensity with the closeness of the obstacle and sometimes a visual sign in complement. The reversing radars of a Ram ProMaster will enable you for parking, but as well for security and keeping away from pedestrians.

How to install parking sensors on a Ram ProMaster?

We now proceed to the step that you are most certainly most intrigued by, fitting reverse parking sensors on a Ram ProMaster. This part is for you if you don’t have a standard reserve sensor set up and you still desire to take advantage of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy auto aftermarket parking sensors to install yourself on your Ram ProMaster.

How to change a malfunctioning backup sensors on a Ram ProMaster

First we’ll see how to change a malfunctioning parking sensor on an Ram ProMaster. If your Ram ProMaster has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to allow the system to function correctly. Luckily for you this process is very simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the malfunctioned parking sensor from your Ram ProMaster, this stage is very intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating correctly.
  • How to install an aftermarket parking sensor kit on an Ram ProMaster

    Now we advance to the part you’re almost certainly most intrigued by, how to install a reverse sensor set up on a Ram ProMaster that doesn’t have one? As we mentioned above, you’re lucky because a good number of OEMs now offer auto aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these types in this part. It is important to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will definitely have to remove the bumper of your Ram ProMaster for the installation, do not hesitate to browse our article content on this subject to learn the procedure to follow. If you don’t feel like it, you can call a specialist, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to adhere to the installation instructions, but we summarize here the main procedures.
    • Remove the bumper if you don’t have access to the inside of it.
    • Think about the ideal placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Ram ProMaster

      And at last, we will now present you the installation of a drill-free parking sensors system on a Ram ProMaster. There are two sort, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This sort of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Follow the installation owners manual which is accessible with some electrical knowledges.
      • Identify the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Ram ProMaster?

        Price of changing a malfunctioning reversing parking sensor for an Ram ProMaster

        The replacement of a damaged reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is essential to count about one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Ram ProMaster

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a good quality system.

        Price of a parking sensors kit without drilling for a Ram ProMaster

        .
        At last, for the price of a reversing radar without drilling for your Ram ProMaster, no matter what version you select, you will have to spend between 30 and 60 euros.

        If you have any additional questions about the Ram ProMaster, do not hesitate to consult our Ram ProMaster category.