Modern cars all come with an impressive quantity of options, but, due to your budget or the year of your Peugeot Expert, you may not be sufficiently lucky to have them all. On this page we’re going to help you solve this situation by showing how to install parking sensor on my Peugeot Expert? Indeed, this feature is extremely helpful, especially if you live in the city and have to park frequently in narrow parking spots. To help you out, we’ll first check out how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Peugeot Expert, and to finish, how much does a parking sensor cost?

install-parking-sensors-peugeot-expert

How does parking sensors work on an Peugeot Expert?

So we start with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting feature will allow you to know the distance between the back of your Peugeot Expert and an obstacle when you move back. It is therefore extremely logical for drivers who have to maneuver frequently, whose field of vision is mediocre, or whose vehicle size is huge.
Often fitted as standard, the reverse sensors of a Peugeot Expert incorporate a set of sensors (minimum 4) that will be turned on with reverse gear and will identify obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and estimate the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will enhance in strength with the proximity of the obstacle and sometimes a visual marker in complement. The reversing radars of a Peugeot Expert will help you for parking, but as well for safety and staying away from pedestrians.

How to install parking sensors on a Peugeot Expert?

We now move on to the section that you are most certainly most intrigued by, fitting reverse parking sensors on a Peugeot Expert. This part is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Peugeot Expert.

How to change a damaged backup sensors on a Peugeot Expert

First we’ll see how to change a damaged parking sensor on an Peugeot Expert. If it turns out your Peugeot Expert has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be replaced to let the system to function correctly. Fortunately for you this process is extremely simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take out the damaged parking sensor from your Peugeot Expert, this part is very intuitive, it is just clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating correctly.
  • How to install an aftermarket parking sensor kit on an Peugeot Expert

    Now we proceed to the part you’re probably most intrigued by, how to install a reverse sensor set up on a Peugeot Expert that doesn’t have one? As we mentioned early on, you’re lucky because a good number of OEMs now sell aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will definitely have to remove the bumper of your Peugeot Expert for the set up, do not hesitate to consult our content page on this subject matter to discover the method to follow. If you don’t feel like it, you can call a mechanic, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to stick to the installation instructions, but we summarize here the main guidelines.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Peugeot Expert

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Peugeot Expert. There are two types, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not affect your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation instructions which is accessible with some electrical bases.
      • Identify the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Peugeot Expert?

        Price of changing a damaged reversing parking sensor for an Peugeot Expert

        The replacement of a broken reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is important to count around one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Peugeot Expert

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a good quality system.

        Price of a parking sensors kit without drilling for a Peugeot Expert

        .
        At last, for the price of a reversing radar without drilling for your Peugeot Expert, no matter what type you go for, you will have to spend between 30 and 60 euros.

        If you wish more tutorials on the Peugeot Expert, go to our Peugeot Expert category.