Recent cars all come with an impressive amount of technology, however, by reason of your budget or the year of your Peugeot 206 , you may not be sufficiently lucky to have them all. In this article we’re going to help you correct this issue by detailing how to install parking sensor on my Peugeot 206 ? In fact, this option is very profitable, particularly if you live in the city and have to park habitually in narrow parking areas. To help you out, we’ll first look at how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Peugeot 206 , and at last, how much does a parking sensor cost?

install-parking-sensors-peugeot-206-

How does parking sensors function on an Peugeot 206 ?

So we begin with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting option will allow you to know the distance between the back of your Peugeot 206 and an obstacle when you maneuver. It is consequently extremely logical for owners who have to maneuver frequently, whose visibility is bad, or whose vehicle size is huge.
Frequently fitted as standard, the reverse sensors of a Peugeot 206 incorporate a kit of sensors (minimum 4) that will be turned on with reverse gear and will identify obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will evaluate the duration of this journey and determine the distance between the obstacle and the radar. In general you will have a sound warning in the cabin which will rise in intensity with the closeness of the obstacle and in some cases a visual indicator in complement. The reversing radars of a Peugeot 206 will enable you for parking, but also for security and avoiding pedestrians.

How to install parking sensors on a Peugeot 206 ?

We now go forward to the part that you are almost certainly most interested in, installing reverse parking sensors on a Peugeot 206 . This part is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Peugeot 206 .

How to change a defective backup sensors on a Peugeot 206

First we’ll see how to change a defective parking sensor on an Peugeot 206 . In the event that your Peugeot 206 has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function effectively. Luckily for you this procedure is particularly simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take out the broken parking sensor from your Peugeot 206 , this part is very intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Peugeot 206

    Now we proceed to the part you’re most likely most interested in, how to install a reverse sensor set up on a Peugeot 206 that doesn’t have one? As we revealed above, you’re lucky because many of OEMs now deal automotive aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will focus on these versions in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will surely have to remove the bumper of your Peugeot 206 for the installation, do not be reluctant to consult our document on this subject to discover the procedure to follow. If you don’t feel like it, you can call a mechanic, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to stick to the installation recommendations, but we summarize here the main procedures.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Give it a try all out.
    • Install a parking sensor without drilling on a Peugeot 206

      And at last, we will now present you the installation of a drill-free parking sensors system on a Peugeot 206 . There are two types, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take out. This kind of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Stick to the installation owners manual which is accessible with some electrical bases.
      • Find the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Peugeot 206 ?

        Price of replacing a defective reversing parking sensor for an Peugeot 206

        The replacement of a broken reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is necessary to count approximately one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Peugeot 206

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a reliable kit.

        Price of a parking sensors kit without drilling for a Peugeot 206

        .
        To conclude, for the price of a reversing radar without drilling for your Peugeot 206 , no matter what version you choose, you will have to pay between 30 and 60 euros.

        If you have any further questions about the Peugeot 206 , do not hesitate to consult our Peugeot 206 category.