Modern cars all come with an incredible number of options, however, because of your budget or the year of your Nissan Xterra, you may not be sufficiently fortunate to have them all. On this page we’re going to help you resolve this concern by telling you how to install parking sensor on my Nissan Xterra? In fact, this option is extremely practical, particularly if you live in the city and have to park your car regularly in narrow parking spots. To help you out, we’ll first take a look at how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Nissan Xterra, and finally, how much does a parking sensor cost?

install-parking-sensors-nissan-xterra

How does parking sensors work on an Nissan Xterra?

So we start with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting option allows you to know the distance between the back of your Nissan Xterra and an obstacle when you move back. It is as a consequence mainly honest for persons who have to maneuver frequently, whose visibility is bad, or whose car size is large.
Nearly always installed as standard, the reverse sensors of a Nissan Xterra is made up of a set of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will analyze the duration of this journey and determine the distance between the obstacle and the radar. In most cases you will have a sound indicator in the cabin which will rise in intensity with the closeness of the obstacle and sometimes a visual indicator in complement. The reversing radars of a Nissan Xterra will help you for parking, but as well for safety and keeping away from pedestrians.

How to install parking sensors on a Nissan Xterra?

We now go forward to the part that you are likely most focused on, fitting reverse parking sensors on a Nissan Xterra. This part is for you if you don’t have a standard reserve sensor set up and you still wish to take advantage of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Nissan Xterra.

How to replace a faulty backup sensors on a Nissan Xterra

First we’ll see how to replace a faulty parking sensor on an Nissan Xterra. In the event that your Nissan Xterra has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be swapped out to let the system to function correctly. Thankfully for you this operation is particularly simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the destroyed parking sensor from your Nissan Xterra, this stage is fairly intuitive, it is just clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s working correctly.
  • How to install an aftermarket parking sensor kit on an Nissan Xterra

    Now we move on to the part you’re likely most focused on, how to install a reverse sensor set up on a Nissan Xterra that doesn’t have one? As we said early on, you’re lucky because a good number of OEMs now provide aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this section. It is important to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will surely have to remove the bumper of your Nissan Xterra for the set up, do not hesitate to read our document on this subject to discover the procedure to follow. If you don’t feel like it, you can call a professional, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to follow the installation guidelines, but we summarize here the main procedures.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the ideal placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Nissan Xterra

      And finally, we will now present you the installation of a drill-free parking sensors system on a Nissan Xterra. There are two options, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take out. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation owners manual which is accessible with some electrical knowledges.
      • Identify the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Nissan Xterra?

        Price of replacing a faulty reversing parking sensor for an Nissan Xterra

        The replacement of a destroyed reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is necessary to count about one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Nissan Xterra

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality kit.

        Price of a parking sensors kit without drilling for a Nissan Xterra

        .
        To conclude, for the price of a reversing radar without drilling for your Nissan Xterra, whatever version you go for, you will have to spend between 30 and 60 euros.

        To get more tips on the Nissan Xterra, take a look at the Nissan Xterra category.