Modern cars all come with an impressive amount of options, however, due to your budget or the year of your Nissan Versa, you may not be sufficiently fortunate to have them all. In this article we’re gonna help you resolve this trouble by explaining how to install parking sensor on my Nissan Versa? In fact, this option is highly profitable, particularly if you live in the city and have to park your car often in narrow parking areas. To help you out, we’ll first check out how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Nissan Versa, and to conclude, how much does a parking sensor cost?

install-parking-sensors-nissan-versa

How does parking sensors function on an Nissan Versa?

So we commence with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting option permits you to know the distance between the back of your Nissan Versa and an obstacle when you move back. It is therefore specifically legitimate for persons who have to maneuver frequently, whose visibility is awful, or whose car size is huge.
Often times installed as standard, the reverse sensors of a Nissan Versa integrate a set of sensors (minimum 4) that will be turned on with reverse gear and will spot obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will examine the duration of this journey and calculate the distance between the obstacle and the radar. Ordinarily you will have a sound warning in the cabin which will rise in strength with the proximity of the obstacle and sometimes a visual sign in complement. The reversing radars of a Nissan Versa will enable you for parking, but as well for security and keeping away from pedestrians.

How to install parking sensors on a Nissan Versa?

We now move on to the section that you are probably most excited about, fitting reverse parking sensors on a Nissan Versa. This part is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Nissan Versa.

How to replace a broken backup sensors on a Nissan Versa

First we’ll see how to replace a broken parking sensor on an Nissan Versa. If your Nissan Versa has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to allow the system to function effectively. Good thing for you this operation is very simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the damaged parking sensor from your Nissan Versa, this step is very intuitive, it is just clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Nissan Versa

    Now we proceed to the part you’re quite likely most excited about, how to install a reverse sensor set up on a Nissan Versa that doesn’t have one? As we mentioned early on, you’re lucky because a good number of OEMs now provide automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will focus on these versions in this part. It is important to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will definitely have to remove the bumper of your Nissan Versa for the set up, do not hesitate to consult our content on this subject matter to learn the process to follow. If you don’t feel like it, you can call a mechanic, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to follow the installation instructions, but we summarize here the main basic steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Think about the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Nissan Versa

      And to conclude, we will now present you the installation of a drill-free parking sensors system on a Nissan Versa. There are two options, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to remove. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation instructions which is accessible with some electrical knowledges.
      • Find the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Nissan Versa?

        Price of replacing a broken reversing parking sensor for an Nissan Versa

        The replacement of a destroyed reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is important to count about one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Nissan Versa

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high quality package.

        Price of a parking sensors kit without drilling for a Nissan Versa

        .
        To finish, for the price of a reversing radar without drilling for your Nissan Versa, whatever type you choose, you will have to spend between 30 and 60 euros.

        To get more tips on the Nissan Versa, take a look at the Nissan Versa category.