Recent cars all come with an astounding amount of technology, but, because of your budget or the year of your Nissan Sentra, you may not be sufficiently fortunate to have them all. On this page we’re going to help you resolve this situation by showing how to install parking sensor on my Nissan Sentra? Indeed, this option is very practical, especially if you live in the city and have to park frequently in narrow parking places. To help you out, we’ll first examine how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Nissan Sentra, and to finish, how much does a parking sensor cost?

install-parking-sensors-nissan-sentra

How does parking sensors function on an Nissan Sentra?

So we commence with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting option permits you to know the distance between the back of your Nissan Sentra and an obstacle when you move back. It is therefore especially good for persons who have to maneuver regularly, whose visibility is poor, or whose vehicle size is huge.
In many cases fitted as standard, the reverse sensors of a Nissan Sentra include a kit of sensors (minimum 4) that will be activated with reverse gear and will detect obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will examine the duration of this journey and calculate the distance between the obstacle and the radar. Ordinarily you will have a sound warning in the cabin which will rise in intensity with the proximity of the obstacle and sometimes a visual marker in complement. The reversing radars of a Nissan Sentra will help you for parking, but also for safety and staying away from pedestrians.

How to install parking sensors on a Nissan Sentra?

We now go forward to the section that you are probably most excited about, fitting reverse parking sensors on a Nissan Sentra. This part is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Nissan Sentra.

How to change a damaged backup sensors on a Nissan Sentra

First we’ll see how to change a damaged parking sensor on an Nissan Sentra. If your Nissan Sentra has suffered a rear shock and one of the sensors of your reversing radar has been damaged, it will have to be replaced to allow the system to function effectively. Good thing for you this procedure is very simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the damaged parking sensor from your Nissan Sentra, this step is fairly intuitive, it is only clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Nissan Sentra

    Now we advance to the part you’re most likely most excited about, how to install a reverse sensor set up on a Nissan Sentra that doesn’t have one? As we explained early on, you’re lucky because a good number of OEMs now sell auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these types in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Nissan Sentra for the set up, do not be reluctant to read our article on this subject matter to learn the method to follow. If you don’t feel like it, you can call a workshop, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to adhere to the installation recommendations, but we summarize here the main guidelines.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the ideal location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Nissan Sentra

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Nissan Sentra. There are two types, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to remove. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation manual which is accessible with some electrical knowledges.
      • Find the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Nissan Sentra?

        Price of changing a damaged reversing parking sensor for an Nissan Sentra

        The replacement of a damaged reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is important to count approximately one hundred euros for the installation of the kit by a workshop.

        Price of an ultrasonic parking sensors with drilling for Nissan Sentra

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high quality kit.

        Price of a parking sensors kit without drilling for a Nissan Sentra

        .
        To finish, for the price of a reversing radar without drilling for your Nissan Sentra, no matter what version you go for, you will have to pay among 30 and 60 euros.

        If you need more tutorials on the Nissan Sentra, go to our Nissan Sentra category.