Modern cars all come with an astounding number of options, however, because of your budget or the year of your Nissan Frontier, you may not be lucky enough to have them all. In this article we’re going to help you correct this issue by telling you how to install parking sensor on my Nissan Frontier? Indeed, this option is highly practical, especially if you live in the city and have to park often in narrow parking areas. To help you out, we’ll first examine how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Nissan Frontier, and at last, how much does a parking sensor cost?


How does parking sensors work on an Nissan Frontier?

So we commence with the functioning of a parking sensor. As we told you in the intro, this particularl interesting option will allow you to know the distance between the back of your Nissan Frontier and an obstacle when you move back. It is as a consequence especially logical for people who have to maneuver regularly, whose visibility is bad, or whose vehicle size is large.
Often fitted as standard, the reverse sensors of a Nissan Frontier consist of a set of sensors (minimum 4) that will be activated with reverse gear and will detect obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will examine the duration of this journey and estimate the distance between the obstacle and the radar. In general you will have a sound indicator in the cabin which will enhance in strength with the closeness of the obstacle and sometimes a visual marker in complement. The reversing radars of a Nissan Frontier will help you for parking, but also for security and avoiding pedestrians.

How to install parking sensors on a Nissan Frontier?

We now proceed to the section that you are almost certainly most focused on, fitting reverse parking sensors on a Nissan Frontier. This part is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Nissan Frontier.

How to replace a faulty backup sensors on a Nissan Frontier

First we’ll see how to replace a faulty parking sensor on an Nissan Frontier. In cases where your Nissan Frontier has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function effectively. Fortunately for you this process is really simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the malfunctioned parking sensor from your Nissan Frontier, this part is fairly intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning effectively.
  • How to install an aftermarket parking sensor kit on an Nissan Frontier

    Now we proceed to the part you’re quite likely most focused on, how to install a reverse sensor set up on a Nissan Frontier that doesn’t have one? As we explained earlier on, you’re lucky because many of OEMs now deal aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will focus on these models in this section. It is important to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will certainly have to remove the bumper of your Nissan Frontier for the installation, do not be reluctant to read our article on this subject matter to learn the procedure to follow. If you don’t feel like it, you can call a specialist, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to follow the installation instructions, but we summarize here the main guidelines.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the ideal placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Nissan Frontier

      And at last, we will now present you the installation of a drill-free parking sensors system on a Nissan Frontier. There are two options, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Adhere to the installation instructions which is accessible with some electrical bases.
      • Find the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Nissan Frontier?

        Price of replacing a faulty reversing parking sensor for an Nissan Frontier

        The replacement of a damaged reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is essential to count about one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Nissan Frontier

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a reliable set up.

        Price of a parking sensors kit without drilling for a Nissan Frontier

        To conclude, for the price of a reversing radar without drilling for your Nissan Frontier, what ever version you choose, you will have to pay between 30 and 60 euros.

        If you need more guides on the Nissan Frontier, go to our Nissan Frontier category.