Recent cars all come with an incredible quantity of technology, however, by reason of your budget or the year of your Mitsubishi Outlander, you may not be sufficiently lucky to have them all. In this article we’re gonna help you solve this problem by detailing how to install parking sensor on my Mitsubishi Outlander? In fact, this option is extremely profitable, particularly if you live in the city and have to park your car habitually in narrow parking spaces. To help you out, we’ll first check out how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Mitsubishi Outlander, and finally, how much does a parking sensor cost?
How does parking sensors function on an Mitsubishi Outlander?
So we start with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting option allows you to know the distance between the back of your Mitsubishi Outlander and an obstacle when you maneuver. It is consequently especially good for persons who have to maneuver frequently, whose visibility is bad, or whose car size is big.
Nearly always installed as standard, the reverse sensors of a Mitsubishi Outlander is made up of a set of sensors (minimum 4) that will be activated with reverse gear and will identify obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will analyze the duration of this journey and determine the distance between the obstacle and the radar. Ordinarily you will have a sound indicator in the cabin which will increase in strength with the closeness of the obstacle and sometimes a visual indicator in complement. The reversing radars of a Mitsubishi Outlander will help you for parking, but as well for security and avoiding pedestrians.
How to install parking sensors on a Mitsubishi Outlander?
We now move on to the section that you are probably most interested in, fitting reverse parking sensors on a Mitsubishi Outlander. This part is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Mitsubishi Outlander.
How to change a broken backup sensors on a Mitsubishi Outlander
First we’ll see how to change a broken parking sensor on an Mitsubishi Outlander. In cases where your Mitsubishi Outlander has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to allow the system to function properly. Luckily for you this operation is particularly simple, you can even make it out yourself without any particular mechanical skill:
- Get a replacing radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Remove the destroyed parking sensor from your Mitsubishi Outlander, this part is fairly intuitive, it is only clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s functioning properly.
- You will simply need to follow the installation guidance, but we summarize here the main simple steps.
- Remove the bumper if you don’t have access to the inside of it.
- Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Test it all out.
- Follow the installation manual which is accessible with some electrical bases.
- Find the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Give it a try all out.
How to install an aftermarket parking sensor kit on an Mitsubishi Outlander
Now we move on to the part you’re almost certainly most interested in, how to install a reverse sensor set up on a Mitsubishi Outlander that doesn’t have one? As we revealed earlier on, you’re lucky because many of OEMs now deal automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this section. It is imperative to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will surely have to remove the bumper of your Mitsubishi Outlander for the installation, do not hesitate to browse our content page on this subject to discover the process to follow. If you don’t feel like it, you can call a mechanic, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Mitsubishi Outlander
And finally, we will now present you the installation of a drill-free parking sensors system on a Mitsubishi Outlander. There are two sort, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take out. This sort of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Mitsubishi Outlander?
Price of swapping a broken reversing parking sensor for an Mitsubishi Outlander
The replacement of a destroyed reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is essential to count around one hundred euros for the installation of the kit by a mechanic.
Price of an ultrasonic parking sensors with drilling for Mitsubishi Outlander
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a top quality set up.
Price of a parking sensors kit without drilling for a Mitsubishi Outlander
.
To finish, for the price of a reversing radar without drilling for your Mitsubishi Outlander, no matter what type you select, you will have to spend among 30 and 60 euros.
In the event that you have any additional questions about the Mitsubishi Outlander, do not hesitate to consult our Mitsubishi Outlander category.
