Modern cars all come with an incredible quantity of options, but, because of your budget or the year of your Mercury Milan, you may not be lucky enough to have them all. Today we’re gonna help you resolve this problem by showing how to install parking sensor on my Mercury Milan? In fact, this feature is very efficient, particularly if you live in the city and have to park often in narrow parking spots. To help you out, we’ll first check out how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Mercury Milan, and to finish, how much does a parking sensor cost?

install-parking-sensors-mercury-milan

How does parking sensors work on an Mercury Milan?

So we commence with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting feature enables you to know the distance between the back of your Mercury Milan and an obstacle when you maneuver. It is therefore mainly good for people who have to maneuver frequently, whose visibility is poor, or whose car size is large.
Often times fitted as standard, the reverse sensors of a Mercury Milan is made up of a kit of sensors (minimum 4) that will be activated with reverse gear and will detect obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will enhance in intensity with the closeness of the obstacle and sometimes a visual marker in complement. The reversing radars of a Mercury Milan will enable you for parking, but as well for safety and keeping away from pedestrians.

How to install parking sensors on a Mercury Milan?

We now move on to the part that you are probably most focused on, fitting reverse parking sensors on a Mercury Milan. This section is for you if you don’t have a standard reserve sensor set up and you still want to take advantage of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Mercury Milan.

How to change a defective backup sensors on a Mercury Milan

First we’ll see how to change a defective parking sensor on an Mercury Milan. In the event that your Mercury Milan has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to allow the system to function effectively. Luckily for you this procedure is really simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the destroyed parking sensor from your Mercury Milan, this step is very intuitive, it is only clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Mercury Milan

    Now we move on to the section you’re probably most focused on, how to install a reverse sensor set up on a Mercury Milan that doesn’t have one? As we revealed early on, you’re lucky because a good number of OEMs now deal auto aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will focus on these models in this section. It is required to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will definitely have to remove the bumper of your Mercury Milan for the set up, do not hesitate to browse our content page on this subject to learn the method to follow. If you don’t feel like it, you can call a mechanic, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to adhere to the installation guidance, but we summarize here the main simple steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Think about the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Give it a try all out.
    • Install a parking sensor without drilling on a Mercury Milan

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Mercury Milan. There are two options, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation manual which is accessible with some electrical knowledges.
      • Locate the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Mercury Milan?

        Price of swapping a defective reversing parking sensor for an Mercury Milan

        The replacement of a destroyed reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is essential to count about one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Mercury Milan

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a reliable kit.

        Price of a parking sensors kit without drilling for a Mercury Milan

        .
        Finally, for the price of a reversing radar without drilling for your Mercury Milan, whatever version you select, you will have to spend among 30 and 60 euros.

        To find more tips on the Mercury Milan, take a look at the Mercury Milan category.