Recent cars all come with an astounding number of technology, nevertheless, resulting from your budget or the year of your Mercury Mariner, you may not be lucky enough to have them all. Today we’re gonna help you solve this issue by detailing how to install parking sensor on my Mercury Mariner? In reality, this option is very useful, especially if you live in the city and have to park your car frequently in narrow parking areas. To help you out, we’ll first take a look at how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Mercury Mariner, and finally, how much does a parking sensor cost?

install-parking-sensors-mercury-mariner

How does parking sensors operate on an Mercury Mariner?

So we begin with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting option enables you to know the distance between the back of your Mercury Mariner and an obstacle when you maneuver. It is therefore extremely legitimate for owners who have to maneuver on a regular basis, whose field of vision is awful, or whose car size is big.
Often fitted as standard, the reverse sensors of a Mercury Mariner consist of a set of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and determine the distance between the obstacle and the radar. Generally you will have a sound indicator in the cabin which will enhance in intensity with the proximity of the obstacle and sometimes a visual marker in complement. The reversing radars of a Mercury Mariner will help you for parking, but also for safety and keeping away from pedestrians.

How to install parking sensors on a Mercury Mariner?

We now advance to the part that you are almost certainly most intrigued by, fitting reverse parking sensors on a Mercury Mariner. This part is for you if you don’t have a standard reserve sensor set up and you still desire to benefit of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy auto aftermarket parking sensors to install yourself on your Mercury Mariner.

How to replace a faulty backup sensors on a Mercury Mariner

First we’ll see how to replace a faulty parking sensor on an Mercury Mariner. If it turns out your Mercury Mariner has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be replaced to let the system to function correctly. Good thing for you this process is very simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take out the malfunctioned parking sensor from your Mercury Mariner, this part is fairly intuitive, it is just clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s working correctly.
  • How to install an aftermarket parking sensor kit on an Mercury Mariner

    Now we proceed to the part you’re most likely most intrigued by, how to install a reverse sensor set up on a Mercury Mariner that doesn’t have one? As we mentioned early on, you’re lucky because a good number of OEMs now sell auto aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Mercury Mariner for the set up, do not hesitate to browse our content page on this subject matter to discover the method to follow. If you don’t feel like it, you can call a workshop, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to stick to the installation guidelines, but we summarize here the main procedures.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Mercury Mariner

      And finally, we will now present you the installation of a drill-free parking sensors system on a Mercury Mariner. There are two options, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take out. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation instructions which is accessible with some electrical bases.
      • Identify the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Mercury Mariner?

        Price of replacing a faulty reversing parking sensor for an Mercury Mariner

        The replacement of a broken reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is necessary to count about one hundred euros for the installation of the kit by a workshop.

        Price of an ultrasonic parking sensors with drilling for Mercury Mariner

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a top quality kit.

        Price of a parking sensors kit without drilling for a Mercury Mariner

        .
        To finish, for the price of a reversing radar without drilling for your Mercury Mariner, what ever type you go for, you will have to pay among 30 and 60 euros.

        Whenever you have any additional questions about the Mercury Mariner, do not hesitate to consult our Mercury Mariner category.