Recent cars all come with an incredible amount of technology, nevertheless, due to your budget or the year of your Mercedes Actros, you may not be sufficiently fortunate to have them all. On this page we’re going to help you correct this problem by showing how to install parking sensor on my Mercedes Actros? In reality, this feature is highly profitable, particularly if you live in the city and have to park regularly in narrow parking spaces. To help you out, we’ll first check out how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Mercedes Actros, and finally, how much does a parking sensor cost?

install-parking-sensors-mercedes-actros

How does parking sensors function on an Mercedes Actros?

So we commence with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature allows you to know the distance between the back of your Mercedes Actros and an obstacle when you maneuver. It is therefore mainly logical for owners who have to maneuver on a regular basis, whose visibility is poor, or whose car size is large.
Nearly always fitted as standard, the reverse sensors of a Mercedes Actros integrate a set of sensors (minimum 4) that will be activated with reverse gear and will sense obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will rise in intensity with the closeness of the obstacle and in some cases a visual marker in complement. The reversing radars of a Mercedes Actros will help you for parking, but as well for security and keeping away from pedestrians.

How to install parking sensors on a Mercedes Actros?

We now proceed to the step that you are probably most focused on, installing reverse parking sensors on a Mercedes Actros. This section is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Mercedes Actros.

How to change a defective backup sensors on a Mercedes Actros

First we’ll see how to change a defective parking sensor on an Mercedes Actros. In the event that your Mercedes Actros has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be replaced to allow the system to function properly. Good thing for you this process is particularly simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take off the destroyed parking sensor from your Mercedes Actros, this part is very intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating properly.
  • How to install an aftermarket parking sensor kit on an Mercedes Actros

    Now we move on to the section you’re likely most focused on, how to install a reverse sensor set up on a Mercedes Actros that doesn’t have one? As we said earlier, you’re lucky because a good number of OEMs now provide aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this section. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will definitely have to remove the bumper of your Mercedes Actros for the set up, do not hesitate to consult our content page on this subject matter to learn the procedure to follow. If you don’t feel like it, you can call a workshop, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to stick to the installation guidance, but we summarize here the main basic steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Mercedes Actros

      And finally, we will now present you the installation of a drill-free parking sensors system on a Mercedes Actros. There are two types, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take off. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation instructions which is accessible with some electrical knowledges.
      • Find the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Mercedes Actros?

        Price of swapping a defective reversing parking sensor for an Mercedes Actros

        The replacement of a broken reversing radar will rely upon the model, but the price will vary between 10 and 30 euros per sensor. It is necessary to count approximately one hundred euros for the installation of the kit by a workshop.

        Price of an ultrasonic parking sensors with drilling for Mercedes Actros

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality system.

        Price of a parking sensors kit without drilling for a Mercedes Actros

        .
        To conclude, for the price of a reversing radar without drilling for your Mercedes Actros, what ever version you select, you will have to pay among 30 and 60 euros.

        To get more tips on the Mercedes Actros, take a look at the Mercedes Actros category.