Modern cars all come with an incredible amount of features, however, because of your budget or the year of your Mazda 6, you may not be sufficiently fortunate to have them all. In this article we’re gonna help you solve this situation by telling you how to install parking sensor on my Mazda 6? Indeed, this feature is very useful, particularly if you live in the city and have to park often in narrow parking spaces. To help you out, we’ll first view how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Mazda 6, and to conclude, how much does a parking sensor cost?
How does parking sensors function on an Mazda 6?
So we commence with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature enables you to know the distance between the back of your Mazda 6 and an obstacle when you move back. It is consequently specifically logical for drivers who have to maneuver on a regular basis, whose field of vision is awful, or whose car size is big.
Frequently installed as standard, the reverse sensors of a Mazda 6 incorporate a kit of sensors (minimum 4) that will be turned on with reverse gear and will identify obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will examine the duration of this journey and calculate the distance between the obstacle and the radar. Ordinarily you will have a sound signal in the cabin which will rise in level with the proximity of the obstacle and sometimes a visual marker in complement. The reversing radars of a Mazda 6 will enable you for parking, but also for safety and avoiding pedestrians.
How to install parking sensors on a Mazda 6?
We now proceed to the step that you are likely most focused on, fitting reverse parking sensors on a Mazda 6. This part is for you if you don’t have a standard reserve sensor set up and you still want to benefit of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Mazda 6.
How to replace a malfunctioning backup sensors on a Mazda 6
First we’ll see how to replace a malfunctioning parking sensor on an Mazda 6. If your Mazda 6 has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function effectively. Luckily for you this process is really simple, you can even make it out yourself without any specified mechanical skill:
- Get a replacement radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Take off the broken parking sensor from your Mazda 6, this step is very intuitive, it is simply clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s working effectively.
- You will just need to adhere to the installation guidelines, but we summarize here the main steps.
- Take off the bumper if you don’t have access to the inside of it.
- Think about the ideal location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it out all out.
- Adhere to the installation instructions which is accessible with some electrical knowledges.
- Locate the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Test it all out.
How to install an aftermarket parking sensor kit on an Mazda 6
Now we proceed to the part you’re likely most focused on, how to install a reverse sensor set up on a Mazda 6 that doesn’t have one? As we revealed earlier, you’re lucky because a good number of OEMs now deal automotive aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this section. It is necessary to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will certainly have to remove the bumper of your Mazda 6 for the installation, do not be reluctant to browse our article content on this subject matter to learn the procedure to follow. If you don’t feel like it, you can call a mechanic, the procedure should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Mazda 6
And to conclude, we will now present you the installation of a drill-free parking sensors system on a Mazda 6. There are two sort, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not damage your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Mazda 6?
Price of changing a malfunctioning reversing parking sensor for an Mazda 6
The replacement of a broken reversing radar will rely upon the model, but the price will vary between 10 and 30 euros per sensor. It is necessary to count approximately one hundred euros for the installation of the kit by a mechanic.
Price of an ultrasonic parking sensors with drilling for Mazda 6
For the models with holes there are many kits and different brands but you will have to count about 50 euros for a reliable package.
Price of a parking sensors kit without drilling for a Mazda 6
.
Finally, for the price of a reversing radar without drilling for your Mazda 6, no matter what version you go for, you will have to pay between 30 and 60 euros.
Whenever you have any additional questions about the Mazda 6, do not hesitate to consult our Mazda 6 category.
