Recent cars all come with an incredible number of technology, but, because of your budget or the year of your Kia Rio 3, you may not be lucky enough to have them all. In this article we’re gonna help you resolve this problem by detailing how to install parking sensor on my Kia Rio 3? In reality, this feature is extremely practical, particularly if you live in the city and have to park your car regularly in narrow parking areas. To help you out, we’ll first look at how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Kia Rio 3, and to conclude, how much does a parking sensor cost?

install-parking-sensors-kia-rio-3

How does parking sensors work on an Kia Rio 3?

So we begin with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature enables you to know the distance between the back of your Kia Rio 3 and an obstacle when you move back. It is as a consequence specifically good for persons who have to maneuver regularly, whose field of vision is awful, or whose car size is huge.
In many cases fitted as standard, the reverse sensors of a Kia Rio 3 integrate a set of sensors (minimum 4) that will be activated with reverse gear and will detect obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will analyze the duration of this journey and determine the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will enhance in strength with the closeness of the obstacle and in some models a visual marker in complement. The reversing radars of a Kia Rio 3 will enable you for parking, but also for safety and staying away from pedestrians.

How to install parking sensors on a Kia Rio 3?

We now go forward to the part that you are quite likely most interested in, installing reverse parking sensors on a Kia Rio 3. This section is for you if you don’t have a standard reserve sensor set up and you still desire to make use of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Kia Rio 3.

How to replace a defective backup sensors on a Kia Rio 3

First we’ll see how to replace a defective parking sensor on an Kia Rio 3. If it turns out your Kia Rio 3 has suffered a rear collision and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function effectively. Luckily for you this operation is particularly simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take out the broken parking sensor from your Kia Rio 3, this step is extremely intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning effectively.
  • How to install an aftermarket parking sensor kit on an Kia Rio 3

    Now we move on to the section you’re almost certainly most interested in, how to install a reverse sensor set up on a Kia Rio 3 that doesn’t have one? As we revealed earlier, you’re lucky because a good number of OEMs now provide auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will certainly have to remove the bumper of your Kia Rio 3 for the installation, do not be reluctant to read our content on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a specialist, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to follow the installation guidelines, but we summarize here the main simple steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Think about the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Kia Rio 3

      And to conclude, we will now present you the installation of a drill-free parking sensors system on a Kia Rio 3. There are two sort, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take out. This kind of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Follow the installation manual which is accessible with some electrical bases.
      • Locate the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Kia Rio 3?

        Price of replacing a defective reversing parking sensor for an Kia Rio 3

        The replacement of a damaged reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is essential to count approximately one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Kia Rio 3

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable kit.

        Price of a parking sensors kit without drilling for a Kia Rio 3

        .
        To conclude, for the price of a reversing radar without drilling for your Kia Rio 3, no matter what type you choose, you will have to pay among 30 and 60 euros.

        To discover more tips on the Kia Rio 3, take a look at the Kia Rio 3 category.