Recent cars all come with an incredible amount of technology, nevertheless, because of your budget or the year of your Jeep Liberty, you may not be lucky enough to have them all. On this page we’re going to help you resolve this concern by explaining how to install parking sensor on my Jeep Liberty? In reality, this feature is very efficient, especially if you live in the city and have to park habitually in narrow parking spots. To help you out, we’ll first check out how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Jeep Liberty, and to finish, how much does a parking sensor cost?


How does parking sensors operate on an Jeep Liberty?

So we start with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting feature permits you to know the distance between the back of your Jeep Liberty and an obstacle when you move back. It is as a consequence specifically legitimate for persons who have to maneuver regularly, whose visibility is mediocre, or whose car size is big.
Frequently fitted as standard, the reverse sensors of a Jeep Liberty integrate a kit of sensors (minimum 4) that will be turned on with reverse gear and will locate obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. Ordinarily you will have a sound warning in the cabin which will increase in level with the proximity of the obstacle and in some models a visual sign in complement. The reversing radars of a Jeep Liberty will enable you for parking, but also for safety and avoiding pedestrians.

How to install parking sensors on a Jeep Liberty?

We now advance to the step that you are most likely most interested in, installing reverse parking sensors on a Jeep Liberty. This section is for you if you don’t have a standard reserve sensor set up and you still want to take advantage of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Jeep Liberty.

How to replace a faulty backup sensors on a Jeep Liberty

First we’ll see how to replace a faulty parking sensor on an Jeep Liberty. If your Jeep Liberty has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function properly. Luckily for you this operation is very simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take off the malfunctioned parking sensor from your Jeep Liberty, this step is very intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating properly.
  • How to install an aftermarket parking sensor kit on an Jeep Liberty

    Now we move on to the section you’re most certainly most interested in, how to install a reverse sensor set up on a Jeep Liberty that doesn’t have one? As we mentioned earlier, you’re lucky because many of OEMs now deal auto aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will focus on these models in this part. It is important to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will surely have to remove the bumper of your Jeep Liberty for the set up, do not be reluctant to read our content on this subject to learn the method to follow. If you don’t feel like it, you can call a specialist, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to adhere to the installation guidance, but we summarize here the main procedures.
    • Take off the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Jeep Liberty

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Jeep Liberty. There are two sort, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation guidebook which is accessible with some electrical knowledges.
      • Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Jeep Liberty?

        Price of changing a faulty reversing parking sensor for an Jeep Liberty

        The replacement of a broken reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is essential to count about one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Jeep Liberty

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality package.

        Price of a parking sensors kit without drilling for a Jeep Liberty

        Finally, for the price of a reversing radar without drilling for your Jeep Liberty, whatever version you select, you will have to pay among 30 and 60 euros.

        If you want more tutorials on the Jeep Liberty, go to our Jeep Liberty category.