Recent cars all come with an impressive number of technology, but, due to your budget or the year of your Jeep Grand Cherokee, you may not be fortunate enough to have them all. Today we’re going to help you correct this problem by showing how to install parking sensor on my Jeep Grand Cherokee? Indeed, this feature is highly profitable, especially if you live in the city and have to park on the regular basis in narrow parking areas. To help you out, we’ll first take a look at how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Jeep Grand Cherokee, and to conclude, how much does a parking sensor cost?

install-parking-sensors-jeep-grand-cherokee

How does parking sensors function on an Jeep Grand Cherokee?

So we begin with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting feature permits you to know the distance between the back of your Jeep Grand Cherokee and an obstacle when you maneuver. It is therefore particularly good for people who have to maneuver often, whose visibility is poor, or whose vehicle size is big.
Often times installed as standard, the reverse sensors of a Jeep Grand Cherokee consist of a set of sensors (minimum 4) that will be turned on with reverse gear and will sense obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound indicator in the cabin which will rise in strength with the proximity of the obstacle and in some cases a visual marker in complement. The reversing radars of a Jeep Grand Cherokee will help you for parking, but also for safety and keeping away from pedestrians.

How to install parking sensors on a Jeep Grand Cherokee?

We now proceed to the part that you are almost certainly most focused on, installing reverse parking sensors on a Jeep Grand Cherokee. This section is for you if you don’t have a standard reserve sensor set up and you still wish to take advantage of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Jeep Grand Cherokee.

How to change a malfunctioning backup sensors on a Jeep Grand Cherokee

First we’ll see how to change a malfunctioning parking sensor on an Jeep Grand Cherokee. If your Jeep Grand Cherokee has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be replaced to let the system to function effectively. Good thing for you this procedure is really simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the damaged parking sensor from your Jeep Grand Cherokee, this step is fairly intuitive, it is only clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s working effectively.
  • How to install an aftermarket parking sensor kit on an Jeep Grand Cherokee

    Now we move on to the section you’re almost certainly most focused on, how to install a reverse sensor set up on a Jeep Grand Cherokee that doesn’t have one? As we mentioned earlier, you’re lucky because many of OEMs now provide aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will surely have to remove the bumper of your Jeep Grand Cherokee for the set up, do not be reluctant to browse our content page on this subject matter to learn the method to follow. If you don’t feel like it, you can call a specialist, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to stick to the installation instructions, but we summarize here the main steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Think about the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Jeep Grand Cherokee

      And to conclude, we will now present you the installation of a drill-free parking sensors system on a Jeep Grand Cherokee. There are two options, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take out. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation owners manual which is accessible with some electrical bases.
      • Determine the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Jeep Grand Cherokee?

        Price of swapping a malfunctioning reversing parking sensor for an Jeep Grand Cherokee

        The replacement of a damaged reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is necessary to count approximately one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Jeep Grand Cherokee

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable system.

        Price of a parking sensors kit without drilling for a Jeep Grand Cherokee

        .
        Finally, for the price of a reversing radar without drilling for your Jeep Grand Cherokee, what ever version you select, you will have to spend among 30 and 60 euros.

        If you want more guides on the Jeep Grand Cherokee, go to our Jeep Grand Cherokee category.