Recent cars all come with an incredible amount of technology, however, by reason of your budget or the year of your Hyundai Sonata, you may not be sufficiently lucky to have them all. In this article we’re going to help you solve this issue by showing how to install parking sensor on my Hyundai Sonata? In reality, this feature is highly useful, especially if you live in the city and have to park your car on the regular basis in narrow parking areas. To help you out, we’ll first check out how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Hyundai Sonata, and finally, how much does a parking sensor cost?

install-parking-sensors-hyundai-sonata

How does parking sensors operate on an Hyundai Sonata?

So we start with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature will allow you to know the distance between the back of your Hyundai Sonata and an obstacle when you maneuver. It is consequently particularly good for drivers who have to maneuver on a regular basis, whose field of vision is bad, or whose car size is huge.
In many cases installed as standard, the reverse sensors of a Hyundai Sonata consist of a set of sensors (minimum 4) that will be turned on with reverse gear and will sense obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will analyze the duration of this journey and determine the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will rise in intensity with the proximity of the obstacle and in some models a visual marker in complement. The reversing radars of a Hyundai Sonata will enable you for parking, but also for safety and staying away from pedestrians.

How to install parking sensors on a Hyundai Sonata?

We now proceed to the step that you are probably most intrigued by, installing reverse parking sensors on a Hyundai Sonata. This section is for you if you don’t have a standard reserve sensor set up and you still wish to take advantage of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Hyundai Sonata.

How to change a damaged backup sensors on a Hyundai Sonata

First we’ll see how to change a damaged parking sensor on an Hyundai Sonata. In cases where your Hyundai Sonata has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to allow the system to function effectively. Fortunately for you this procedure is really simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the damaged parking sensor from your Hyundai Sonata, this step is fairly intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning effectively.
  • How to install an aftermarket parking sensor kit on an Hyundai Sonata

    Now we move on to the section you’re likely most intrigued by, how to install a reverse sensor set up on a Hyundai Sonata that doesn’t have one? As we said above, you’re lucky because a good number of OEMs now provide aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this section. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will surely have to remove the bumper of your Hyundai Sonata for the installation, do not be reluctant to browse our content page on this subject to learn the procedure to follow. If you don’t feel like it, you can call a specialist, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to stick to the installation guidelines, but we summarize here the main procedures.
    • Remove the bumper if you don’t have access to the inside of it.
    • Think about the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Hyundai Sonata

      And finally, we will now present you the installation of a drill-free parking sensors system on a Hyundai Sonata. There are two types, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take out. This kind of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Stick to the installation manual which is accessible with some electrical bases.
      • Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Hyundai Sonata?

        Price of replacing a damaged reversing parking sensor for an Hyundai Sonata

        The replacement of a destroyed reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is necessary to count around one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Hyundai Sonata

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high class kit.

        Price of a parking sensors kit without drilling for a Hyundai Sonata

        .
        To finish, for the price of a reversing radar without drilling for your Hyundai Sonata, no matter what type you choose, you will have to pay between 30 and 60 euros.

        If you wish more tutorials on the Hyundai Sonata, go to our Hyundai Sonata category.