Recent cars all come with an astounding quantity of technology, however, due to your budget or the year of your GMC Yukon, you may not be lucky enough to have them all. Today we’re gonna help you solve this issue by showing how to install parking sensor on my GMC Yukon? In fact, this feature is very practical, especially if you live in the city and have to park often in narrow parking spaces. To help you out, we’ll first view how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a GMC Yukon, and to finish, how much does a parking sensor cost?
How does parking sensors work on an GMC Yukon?
So we start with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting feature allows you to know the distance between the back of your GMC Yukon and an obstacle when you maneuver. It is therefore specifically good for persons who have to maneuver frequently, whose visibility is bad, or whose vehicle size is large.
Often times fitted as standard, the reverse sensors of a GMC Yukon integrate a set of sensors (minimum 4) that will be activated with reverse gear and will sense obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will enhance in intensity with the closeness of the obstacle and in some models a visual marker in complement. The reversing radars of a GMC Yukon will help you for parking, but also for safety and staying away from pedestrians.
How to install parking sensors on a GMC Yukon?
We now go forward to the section that you are most certainly most excited about, installing reverse parking sensors on a GMC Yukon. This part is for you if you don’t have a standard reserve sensor set up and you still want to make use of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your GMC Yukon.
How to replace a broken backup sensors on a GMC Yukon
First we’ll see how to replace a broken parking sensor on an GMC Yukon. If your GMC Yukon has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be replaced to allow the system to function properly. Fortunately for you this operation is really simple, you can even carry it out yourself without any particular mechanical skill:
- Get a replacement radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Take out the destroyed parking sensor from your GMC Yukon, this part is extremely intuitive, it is simply clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s functioning properly.
- You will simply need to follow the installation guidance, but we summarize here the main simple steps.
- Take out the bumper if you don’t have access to the inside of it.
- Think about the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it out all out.
- Adhere to the installation manual which is accessible with some electrical knowledges.
- Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Give it a try all out.
How to install an aftermarket parking sensor kit on an GMC Yukon
Now we move on to the part you’re most certainly most excited about, how to install a reverse sensor set up on a GMC Yukon that doesn’t have one? As we mentioned earlier on, you’re lucky because a good number of OEMs now sell automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this section. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will certainly have to remove the bumper of your GMC Yukon for the installation, do not hesitate to read our article content on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a mechanic, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a GMC Yukon
And to finish, we will now present you the installation of a drill-free parking sensors system on a GMC Yukon. There are two kind, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to remove. This kind of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a GMC Yukon?
Price of changing a broken reversing parking sensor for an GMC Yukon
The replacement of a broken reversing radar will rely upon the model, but the price will vary between 10 and 30 euros per sensor. It is required to count approximately one hundred euros for the installation of the kit by a mechanic.
Price of an ultrasonic parking sensors with drilling for GMC Yukon
For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high quality set up.
Price of a parking sensors kit without drilling for a GMC Yukon
.
To conclude, for the price of a reversing radar without drilling for your GMC Yukon, whatever type you choose, you will have to spend between 30 and 60 euros.
To find more tips on the GMC Yukon, take a look at the GMC Yukon category.
