Modern cars all come with an incredible number of technology, nevertheless, because of your budget or the year of your GMC Canyon, you may not be sufficiently lucky to have them all. In this article we’re going to help you resolve this concern by detailing how to install parking sensor on my GMC Canyon? Indeed, this option is highly useful, especially if you live in the city and have to park frequently in narrow parking spots. To help you out, we’ll first look at how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a GMC Canyon, and to finish, how much does a parking sensor cost?

install-parking-sensors-gmc-canyon

How does parking sensors function on an GMC Canyon?

So we begin with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting option allows you to know the distance between the back of your GMC Canyon and an obstacle when you maneuver. It is as a consequence especially honest for people who have to maneuver on a regular basis, whose visibility is awful, or whose car size is huge.
Often installed as standard, the reverse sensors of a GMC Canyon integrate a kit of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. Ordinarily you will have a sound signal in the cabin which will rise in strength with the closeness of the obstacle and in some cases a visual indicator in complement. The reversing radars of a GMC Canyon will help you for parking, but also for safety and avoiding pedestrians.

How to install parking sensors on a GMC Canyon?

We now go forward to the part that you are likely most excited about, installing reverse parking sensors on a GMC Canyon. This part is for you if you don’t have a standard reserve sensor set up and you still desire to benefit of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy auto aftermarket parking sensors to install yourself on your GMC Canyon.

How to change a defective backup sensors on a GMC Canyon

First we’ll see how to change a defective parking sensor on an GMC Canyon. If your GMC Canyon has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be swapped out to let the system to function effectively. Fortunately for you this operation is very simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take off the broken parking sensor from your GMC Canyon, this part is fairly intuitive, it is simply clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning effectively.
  • How to install an aftermarket parking sensor kit on an GMC Canyon

    Now we advance to the part you’re almost certainly most excited about, how to install a reverse sensor set up on a GMC Canyon that doesn’t have one? As we said earlier on, you’re lucky because a good number of OEMs now deal auto aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this section. It is important to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will surely have to remove the bumper of your GMC Canyon for the installation, do not hesitate to consult our content page on this subject matter to learn the process to follow. If you don’t feel like it, you can call a specialist, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to adhere to the installation guidance, but we summarize here the main steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Think about the ideal location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a GMC Canyon

      And to finish, we will now present you the installation of a drill-free parking sensors system on a GMC Canyon. There are two kind, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This kind of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Follow the installation manual which is accessible with some electrical knowledges.
      • Identify the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a GMC Canyon?

        Price of swapping a defective reversing parking sensor for an GMC Canyon

        The replacement of a broken reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is necessary to count approximately one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for GMC Canyon

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a reliable package.

        Price of a parking sensors kit without drilling for a GMC Canyon

        .
        To conclude, for the price of a reversing radar without drilling for your GMC Canyon, whatever version you choose, you will have to pay between 30 and 60 euros.

        If you want more tutorials on the GMC Canyon, go to our GMC Canyon category.