Modern cars all come with an astounding number of technology, however, due to your budget or the year of your Ford F 350 , you may not be lucky enough to have them all. In this article we’re gonna help you solve this concern by detailing how to install parking sensor on my Ford F 350 ? In fact, this option is highly efficient, particularly if you live in the city and have to park frequently in narrow parking spots. To help you out, we’ll first check out how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a Ford F 350 , and to conclude, how much does a parking sensor cost?

install-parking-sensors-ford-f-350 

How does parking sensors function on an Ford F 350 ?

So we commence with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting option will allow you to know the distance between the back of your Ford F 350  and an obstacle when you maneuver. It is therefore specifically honest for drivers who have to maneuver on a regular basis, whose visibility is bad, or whose vehicle size is big.
Nearly always fitted as standard, the reverse sensors of a Ford F 350  incorporate a set of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. Ordinarily you will have a sound warning in the cabin which will increase in strength with the closeness of the obstacle and in some models a visual marker in complement. The reversing radars of a Ford F 350  will help you for parking, but also for safety and staying away from pedestrians.

How to install parking sensors on a Ford F 350 ?

We now proceed to the section that you are likely most interested in, fitting reverse parking sensors on a Ford F 350 . This part is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy auto aftermarket parking sensors to install yourself on your Ford F 350 .

How to change a broken backup sensors on a Ford F 350 

First we’ll see how to change a broken parking sensor on an Ford F 350 . In the event that your Ford F 350  has suffered a rear shock and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function properly. Thankfully for you this operation is particularly simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take off the damaged parking sensor from your Ford F 350 , this part is very intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating properly.
  • How to install an aftermarket parking sensor kit on an Ford F 350 

    Now we move on to the part you’re likely most interested in, how to install a reverse sensor set up on a Ford F 350  that doesn’t have one? As we mentioned early on, you’re lucky because a good number of OEMs now sell auto aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this section. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will surely have to remove the bumper of your Ford F 350  for the installation, do not be reluctant to consult our content page on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a workshop, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to stick to the installation instructions, but we summarize here the main simple steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Think about the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Give it a try all out.
    • Install a parking sensor without drilling on a Ford F 350 

      And to conclude, we will now present you the installation of a drill-free parking sensors system on a Ford F 350 . There are two types, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to remove. This kind of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Follow the installation manual which is accessible with some electrical knowledges.
      • Identify the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Ford F 350 ?

        Price of swapping a broken reversing parking sensor for an Ford F 350 

        The replacement of a damaged reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is necessary to count approximately one hundred euros for the installation of the kit by a workshop.

        Price of an ultrasonic parking sensors with drilling for Ford F 350 

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a reliable set up.

        Price of a parking sensors kit without drilling for a Ford F 350 

        .
        To finish, for the price of a reversing radar without drilling for your Ford F 350 , whatever version you go for, you will have to spend among 30 and 60 euros.

        Whenever you have any further questions about the Ford F 350 , do not hesitate to consult our Ford F 350  category.