Modern cars all come with an impressive amount of technology, but, because of your budget or the year of your Ford Ecosport, you may not be sufficiently fortunate to have them all. On this page we’re gonna help you correct this issue by telling you how to install parking sensor on my Ford Ecosport? Indeed, this feature is very profitable, particularly if you live in the city and have to park your car frequently in narrow parking spots. To help you out, we’ll first take a look at how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Ford Ecosport, and finally, how much does a parking sensor cost?

install-parking-sensors-ford-ecosport

How does parking sensors function on an Ford Ecosport?

So we commence with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting feature will allow you to know the distance between the back of your Ford Ecosport and an obstacle when you move back. It is as a consequence mainly honest for drivers who have to maneuver regularly, whose field of vision is poor, or whose car size is large.
Often times installed as standard, the reverse sensors of a Ford Ecosport is made up of a set of sensors (minimum 4) that will be turned on with reverse gear and will locate obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. In most cases you will have a sound signal in the cabin which will increase in level with the proximity of the obstacle and sometimes a visual marker in complement. The reversing radars of a Ford Ecosport will enable you for parking, but also for security and avoiding pedestrians.

How to install parking sensors on a Ford Ecosport?

We now go forward to the section that you are quite likely most excited about, installing reverse parking sensors on a Ford Ecosport. This part is for you if you don’t have a standard reserve sensor set up and you still want to make use of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Ford Ecosport.

How to change a defective backup sensors on a Ford Ecosport

First we’ll see how to change a defective parking sensor on an Ford Ecosport. If your Ford Ecosport has suffered a rear shock and one of the sensors of your reversing radar has been damaged, it will have to be replaced to let the system to function effectively. Luckily for you this procedure is particularly simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take off the broken parking sensor from your Ford Ecosport, this part is fairly intuitive, it is just clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning effectively.
  • How to install an aftermarket parking sensor kit on an Ford Ecosport

    Now we go forward to the part you’re almost certainly most excited about, how to install a reverse sensor set up on a Ford Ecosport that doesn’t have one? As we said early on, you’re lucky because many of OEMs now provide automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this section. It is imperative to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will certainly have to remove the bumper of your Ford Ecosport for the set up, do not hesitate to consult our article on this subject to learn the procedure to follow. If you don’t feel like it, you can call a specialist, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to follow the installation recommendations, but we summarize here the main basic steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Think about the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Ford Ecosport

      And finally, we will now present you the installation of a drill-free parking sensors system on a Ford Ecosport. There are two types, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation guidebook which is accessible with some electrical bases.
      • Find the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Ford Ecosport?

        Price of changing a defective reversing parking sensor for an Ford Ecosport

        The replacement of a damaged reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is important to count about one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Ford Ecosport

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable set up.

        Price of a parking sensors kit without drilling for a Ford Ecosport

        .
        To finish, for the price of a reversing radar without drilling for your Ford Ecosport, no matter what version you go for, you will have to spend among 30 and 60 euros.

        To find more tips on the Ford Ecosport, take a look at the Ford Ecosport category.