Recent cars all come with an astounding quantity of technology, but, resulting from your budget or the year of your Ford Crown Victoria, you may not be sufficiently fortunate to have them all. Today we’re gonna help you resolve this problem by telling you how to install parking sensor on my Ford Crown Victoria? In reality, this option is very profitable, especially if you live in the city and have to park your car often in narrow parking spots. To help you out, we’ll first look at how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Ford Crown Victoria, and at last, how much does a parking sensor cost?
How does parking sensors work on an Ford Crown Victoria?
So we begin with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting option allows you to know the distance between the back of your Ford Crown Victoria and an obstacle when you move back. It is therefore extremely honest for persons who have to maneuver on a regular basis, whose visibility is poor, or whose vehicle size is huge.
Nearly always fitted as standard, the reverse sensors of a Ford Crown Victoria consist of a set of sensors (minimum 4) that will be turned on with reverse gear and will locate obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will examine the duration of this journey and estimate the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will enhance in strength with the closeness of the obstacle and sometimes a visual sign in complement. The reversing radars of a Ford Crown Victoria will help you for parking, but also for safety and avoiding pedestrians.
How to install parking sensors on a Ford Crown Victoria?
We now proceed to the part that you are most likely most intrigued by, installing reverse parking sensors on a Ford Crown Victoria. This part is for you if you don’t have a standard reserve sensor set up and you still desire to make use of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Ford Crown Victoria.
How to replace a broken backup sensors on a Ford Crown Victoria
First we’ll see how to replace a broken parking sensor on an Ford Crown Victoria. If your Ford Crown Victoria has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be replaced to allow the system to function correctly. Fortunately for you this process is extremely simple, you can even make it out yourself without any particular mechanical skill:
- Get a replacement radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Take out the damaged parking sensor from your Ford Crown Victoria, this stage is extremely intuitive, it is only clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s working correctly.
- You will just need to follow the installation guidelines, but we summarize here the main simple steps.
- Take out the bumper if you don’t have access to the inside of it.
- Reflect on the ideal location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Test it all out.
- Adhere to the installation guidebook which is accessible with some electrical knowledges.
- Locate the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Give it a try all out.
How to install an aftermarket parking sensor kit on an Ford Crown Victoria
Now we go forward to the part you’re most likely most intrigued by, how to install a reverse sensor set up on a Ford Crown Victoria that doesn’t have one? As we said early on, you’re lucky because many of OEMs now sell auto aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will focus on these models in this section. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will surely have to remove the bumper of your Ford Crown Victoria for the set up, do not hesitate to consult our article on this subject matter to learn the method to follow. If you don’t feel like it, you can call a specialist, the task should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Ford Crown Victoria
And at last, we will now present you the installation of a drill-free parking sensors system on a Ford Crown Victoria. There are two kind, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take out. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a Ford Crown Victoria?
Price of swapping a broken reversing parking sensor for an Ford Crown Victoria
The replacement of a damaged reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is important to count around one hundred euros for the installation of the kit by a specialist.
Price of an ultrasonic parking sensors with drilling for Ford Crown Victoria
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a top quality kit.
Price of a parking sensors kit without drilling for a Ford Crown Victoria
.
Finally, for the price of a reversing radar without drilling for your Ford Crown Victoria, whatever version you select, you will have to spend between 30 and 60 euros.
If you have any additional questions about the Ford Crown Victoria, do not hesitate to consult our Ford Crown Victoria category.
