Recent cars all come with an astounding number of options, but, due to your budget or the year of your Fiat Tipo, you may not be sufficiently fortunate to have them all. In this article we’re going to help you solve this problem by telling you how to install parking sensor on my Fiat Tipo? In fact, this option is extremely handy, especially if you live in the city and have to park your car habitually in narrow parking areas. To help you out, we’ll first check out how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Fiat Tipo, and to finish, how much does a parking sensor cost?

install-parking-sensors-fiat-tipo

How does parking sensors work on an Fiat Tipo?

So we commence with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting option permits you to know the distance between the back of your Fiat Tipo and an obstacle when you move back. It is therefore particularly logical for owners who have to maneuver often, whose field of vision is awful, or whose vehicle size is huge.
Frequently installed as standard, the reverse sensors of a Fiat Tipo incorporate a set of sensors (minimum 4) that will be turned on with reverse gear and will locate obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. In general you will have a sound indicator in the cabin which will enhance in level with the closeness of the obstacle and in some models a visual indicator in complement. The reversing radars of a Fiat Tipo will help you for parking, but as well for security and staying away from pedestrians.

How to install parking sensors on a Fiat Tipo?

We now proceed to the part that you are almost certainly most intrigued by, fitting reverse parking sensors on a Fiat Tipo. This section is for you if you don’t have a standard reserve sensor set up and you still want to take advantage of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Fiat Tipo.

How to change a damaged backup sensors on a Fiat Tipo

First we’ll see how to change a damaged parking sensor on an Fiat Tipo. In cases where your Fiat Tipo has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be replaced to let the system to function correctly. Fortunately for you this procedure is very simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take off the broken parking sensor from your Fiat Tipo, this step is extremely intuitive, it is just clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s working correctly.
  • How to install an aftermarket parking sensor kit on an Fiat Tipo

    Now we go forward to the section you’re most certainly most intrigued by, how to install a reverse sensor set up on a Fiat Tipo that doesn’t have one? As we revealed early on, you’re lucky because many of OEMs now deal aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this section. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Fiat Tipo for the set up, do not be reluctant to browse our article content on this subject matter to discover the method to follow. If you don’t feel like it, you can call a professional, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to stick to the installation guidelines, but we summarize here the main simple steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Think about the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Fiat Tipo

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Fiat Tipo. There are two kind, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to remove. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Stick to the installation instructions which is accessible with some electrical knowledges.
      • Determine the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Fiat Tipo?

        Price of swapping a damaged reversing parking sensor for an Fiat Tipo

        The replacement of a damaged reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is necessary to count around one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Fiat Tipo

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality package.

        Price of a parking sensors kit without drilling for a Fiat Tipo

        .
        To conclude, for the price of a reversing radar without drilling for your Fiat Tipo, no matter what version you go for, you will have to spend between 30 and 60 euros.

        In the event that you have any additional questions about the Fiat Tipo, do not hesitate to consult our Fiat Tipo category.