Modern cars all come with an astounding amount of features, nevertheless, resulting from your budget or the year of your Fiat Doblo 2, you may not be lucky enough to have them all. In this article we’re going to help you correct this issue by telling you how to install parking sensor on my Fiat Doblo 2? Indeed, this feature is extremely profitable, particularly if you live in the city and have to park your car frequently in narrow parking spots. To help you out, we’ll first look at how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Fiat Doblo 2, and to conclude, how much does a parking sensor cost?

install-parking-sensors-fiat-doblo-2

How does parking sensors operate on an Fiat Doblo 2?

So we start with the functioning of a parking sensor. As we told you in the intro, this particularl interesting feature will allow you to know the distance between the back of your Fiat Doblo 2 and an obstacle when you maneuver. It is therefore particularly legitimate for persons who have to maneuver regularly, whose visibility is bad, or whose car size is huge.
Often times fitted as standard, the reverse sensors of a Fiat Doblo 2 include a set of sensors (minimum 4) that will be turned on with reverse gear and will sense obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. In general you will have a sound warning in the cabin which will rise in strength with the proximity of the obstacle and in some models a visual indicator in complement. The reversing radars of a Fiat Doblo 2 will enable you for parking, but also for security and keeping away from pedestrians.

How to install parking sensors on a Fiat Doblo 2?

We now advance to the step that you are likely most focused on, installing reverse parking sensors on a Fiat Doblo 2. This part is for you if you don’t have a standard reserve sensor set up and you still desire to make use of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Fiat Doblo 2.

How to replace a broken backup sensors on a Fiat Doblo 2

First we’ll see how to replace a broken parking sensor on an Fiat Doblo 2. In cases where your Fiat Doblo 2 has suffered a rear collision and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function properly. Fortunately for you this procedure is really simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take out the broken parking sensor from your Fiat Doblo 2, this stage is fairly intuitive, it is simply clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s working properly.
  • How to install an aftermarket parking sensor kit on an Fiat Doblo 2

    Now we go forward to the part you’re most likely most focused on, how to install a reverse sensor set up on a Fiat Doblo 2 that doesn’t have one? As we explained early on, you’re lucky because many of OEMs now provide auto aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this part. It is important to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will definitely have to remove the bumper of your Fiat Doblo 2 for the installation, do not hesitate to browse our document on this subject to learn the method to follow. If you don’t feel like it, you can call a specialist, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to adhere to the installation guidance, but we summarize here the main steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the ideal placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Fiat Doblo 2

      And to conclude, we will now present you the installation of a drill-free parking sensors system on a Fiat Doblo 2. There are two types, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not affect your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Follow the installation owners manual which is accessible with some electrical bases.
      • Locate the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Fiat Doblo 2?

        Price of replacing a broken reversing parking sensor for an Fiat Doblo 2

        The replacement of a damaged reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is important to count approximately one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Fiat Doblo 2

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high quality package.

        Price of a parking sensors kit without drilling for a Fiat Doblo 2

        .
        Finally, for the price of a reversing radar without drilling for your Fiat Doblo 2, whatever version you select, you will have to spend between 30 and 60 euros.

        To get more tips on the Fiat Doblo 2, take a look at the Fiat Doblo 2 category.