Modern cars all come with an incredible number of technology, however, resulting from your budget or the year of your Fiat Bravo, you may not be fortunate enough to have them all. Today we’re gonna help you solve this trouble by explaining how to install parking sensor on my Fiat Bravo? In reality, this option is very profitable, especially if you live in the city and have to park often in narrow parking places. To help you out, we’ll first examine how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Fiat Bravo, and to conclude, how much does a parking sensor cost?
How does parking sensors work on an Fiat Bravo?
So we begin with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting option permits you to know the distance between the back of your Fiat Bravo and an obstacle when you maneuver. It is as a consequence extremely good for people who have to maneuver often, whose field of vision is bad, or whose vehicle size is huge.
Often installed as standard, the reverse sensors of a Fiat Bravo consist of a set of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will examine the duration of this journey and estimate the distance between the obstacle and the radar. Ordinarily you will have a sound signal in the cabin which will enhance in intensity with the proximity of the obstacle and sometimes a visual marker in complement. The reversing radars of a Fiat Bravo will help you for parking, but as well for safety and avoiding pedestrians.
How to install parking sensors on a Fiat Bravo?
We now advance to the step that you are most certainly most excited about, installing reverse parking sensors on a Fiat Bravo. This part is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Fiat Bravo.
How to change a defective backup sensors on a Fiat Bravo
First we’ll see how to change a defective parking sensor on an Fiat Bravo. If your Fiat Bravo has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to allow the system to function effectively. Good thing for you this procedure is extremely simple, you can even carry it out yourself without any particular mechanical skill:
- Get a replacing radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Remove the malfunctioned parking sensor from your Fiat Bravo, this stage is very intuitive, it is simply clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating effectively.
- You will simply need to adhere to the installation guidelines, but we summarize here the main basic steps.
- Remove the bumper if you don’t have access to the inside of it.
- Think about the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it out all out.
- Stick to the installation manual which is accessible with some electrical bases.
- Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Test it all out.
How to install an aftermarket parking sensor kit on an Fiat Bravo
Now we advance to the part you’re likely most excited about, how to install a reverse sensor set up on a Fiat Bravo that doesn’t have one? As we said earlier, you’re lucky because many of OEMs now deal aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these types in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will definitely have to remove the bumper of your Fiat Bravo for the installation, do not be reluctant to read our content page on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a professional, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Fiat Bravo
And to conclude, we will now present you the installation of a drill-free parking sensors system on a Fiat Bravo. There are two options, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Fiat Bravo?
Price of swapping a defective reversing parking sensor for an Fiat Bravo
The replacement of a damaged reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is necessary to count approximately one hundred euros for the installation of the kit by a professional.
Price of an ultrasonic parking sensors with drilling for Fiat Bravo
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high quality kit.
Price of a parking sensors kit without drilling for a Fiat Bravo
.
To conclude, for the price of a reversing radar without drilling for your Fiat Bravo, what ever version you select, you will have to pay among 30 and 60 euros.
If you wish more tutorials on the Fiat Bravo, go to our Fiat Bravo category.
