Modern cars all come with an astounding amount of options, however, resulting from your budget or the year of your Dacia Logan, you may not be fortunate enough to have them all. In this article we’re going to help you solve this concern by telling you how to install parking sensor on my Dacia Logan? In reality, this feature is very helpful, especially if you live in the city and have to park your car habitually in narrow parking places. To help you out, we’ll first take a look at how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Dacia Logan, and to finish, how much does a parking sensor cost?

install-parking-sensors-dacia-logan

How does parking sensors work on an Dacia Logan?

So we begin with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting feature will allow you to know the distance between the back of your Dacia Logan and an obstacle when you maneuver. It is consequently particularly honest for owners who have to maneuver often, whose visibility is poor, or whose vehicle size is huge.
Frequently fitted as standard, the reverse sensors of a Dacia Logan incorporate a kit of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. Ordinarily you will have a sound indicator in the cabin which will increase in intensity with the closeness of the obstacle and in some cases a visual indicator in complement. The reversing radars of a Dacia Logan will help you for parking, but as well for security and staying away from pedestrians.

How to install parking sensors on a Dacia Logan?

We now proceed to the part that you are most likely most intrigued by, fitting reverse parking sensors on a Dacia Logan. This section is for you if you don’t have a standard reserve sensor set up and you still wish to take advantage of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Dacia Logan.

How to replace a broken backup sensors on a Dacia Logan

First we’ll see how to replace a broken parking sensor on an Dacia Logan. If your Dacia Logan has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function correctly. Fortunately for you this procedure is particularly simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take off the destroyed parking sensor from your Dacia Logan, this part is fairly intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning correctly.
  • How to install an aftermarket parking sensor kit on an Dacia Logan

    Now we proceed to the section you’re almost certainly most intrigued by, how to install a reverse sensor set up on a Dacia Logan that doesn’t have one? As we explained earlier, you’re lucky because a good number of OEMs now provide automotive aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this section. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will surely have to remove the bumper of your Dacia Logan for the installation, do not hesitate to consult our document on this subject to discover the procedure to follow. If you don’t feel like it, you can call a mechanic, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to stick to the installation recommendations, but we summarize here the main basic steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Think about the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Dacia Logan

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Dacia Logan. There are two sort, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take out. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Adhere to the installation instructions which is accessible with some electrical bases.
      • Determine the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Dacia Logan?

        Price of changing a broken reversing parking sensor for an Dacia Logan

        The replacement of a broken reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is required to count approximately one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Dacia Logan

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality set up.

        Price of a parking sensors kit without drilling for a Dacia Logan

        .
        To conclude, for the price of a reversing radar without drilling for your Dacia Logan, whatever version you go for, you will have to spend between 30 and 60 euros.

        To find more tips on the Dacia Logan, take a look at the Dacia Logan category.