Modern cars all come with an astounding amount of options, but, because of your budget or the year of your Citroen Berlingo 2, you may not be sufficiently fortunate to have them all. In this article we’re gonna help you solve this issue by showing how to install parking sensor on my Citroen Berlingo 2? In reality, this feature is very efficient, especially if you live in the city and have to park your car habitually in narrow parking places. To help you out, we’ll first take a look at how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a Citroen Berlingo 2, and to finish, how much does a parking sensor cost?

install-parking-sensors-citroen-berlingo-2

How does parking sensors work on an Citroen Berlingo 2?

So we begin with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature enables you to know the distance between the back of your Citroen Berlingo 2 and an obstacle when you maneuver. It is as a result especially legitimate for people who have to maneuver often, whose field of vision is mediocre, or whose vehicle size is large.
Nearly always installed as standard, the reverse sensors of a Citroen Berlingo 2 is made up of a set of sensors (minimum 4) that will be activated with reverse gear and will sense obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will increase in level with the closeness of the obstacle and in some cases a visual sign in complement. The reversing radars of a Citroen Berlingo 2 will help you for parking, but as well for safety and avoiding pedestrians.

How to install parking sensors on a Citroen Berlingo 2?

We now move on to the part that you are quite likely most intrigued by, fitting reverse parking sensors on a Citroen Berlingo 2. This part is for you if you don’t have a standard reserve sensor set up and you still desire to benefit of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Citroen Berlingo 2.

How to replace a faulty backup sensors on a Citroen Berlingo 2

First we’ll see how to replace a faulty parking sensor on an Citroen Berlingo 2. If it turns out your Citroen Berlingo 2 has suffered a rear collision and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function effectively. Good thing for you this operation is particularly simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take off the broken parking sensor from your Citroen Berlingo 2, this part is fairly intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Citroen Berlingo 2

    Now we proceed to the part you’re quite likely most intrigued by, how to install a reverse sensor set up on a Citroen Berlingo 2 that doesn’t have one? As we mentioned above, you’re lucky because a good number of OEMs now deal aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this part. It is imperative to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will surely have to remove the bumper of your Citroen Berlingo 2 for the installation, do not hesitate to consult our article on this subject matter to discover the method to follow. If you don’t feel like it, you can call a professional, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to stick to the installation guidance, but we summarize here the main guidelines.
    • Take off the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Citroen Berlingo 2

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Citroen Berlingo 2. There are two options, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This kind of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Follow the installation guidebook which is accessible with some electrical bases.
      • Identify the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Citroen Berlingo 2?

        Price of changing a faulty reversing parking sensor for an Citroen Berlingo 2

        The replacement of a damaged reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is essential to count around one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Citroen Berlingo 2

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a good quality kit.

        Price of a parking sensors kit without drilling for a Citroen Berlingo 2

        .
        Finally, for the price of a reversing radar without drilling for your Citroen Berlingo 2, what ever type you choose, you will have to spend between 30 and 60 euros.

        To discover more tips on the Citroen Berlingo 2, take a look at the Citroen Berlingo 2 category.