Modern cars all come with an incredible quantity of options, however, because of your budget or the year of your Chrysler 200, you may not be sufficiently lucky to have them all. Today we’re going to help you solve this issue by detailing how to install parking sensor on my Chrysler 200? Indeed, this feature is very efficient, particularly if you live in the city and have to park often in narrow parking spots. To help you out, we’ll first check out how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Chrysler 200, and to finish, how much does a parking sensor cost?

install-parking-sensors-chrysler-200

How does parking sensors function on an Chrysler 200?

So we begin with the functioning of a parking sensor. As we told you in the intro, this particularl interesting feature allows you to know the distance between the back of your Chrysler 200 and an obstacle when you maneuver. It is as a result specifically honest for owners who have to maneuver regularly, whose visibility is bad, or whose car size is big.
Frequently installed as standard, the reverse sensors of a Chrysler 200 is made up of a set of sensors (minimum 4) that will be activated with reverse gear and will detect obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will evaluate the duration of this journey and estimate the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will rise in level with the proximity of the obstacle and in some models a visual indicator in complement. The reversing radars of a Chrysler 200 will help you for parking, but also for safety and keeping away from pedestrians.

How to install parking sensors on a Chrysler 200?

We now proceed to the part that you are most likely most focused on, fitting reverse parking sensors on a Chrysler 200. This section is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Chrysler 200.

How to replace a faulty backup sensors on a Chrysler 200

First we’ll see how to replace a faulty parking sensor on an Chrysler 200. In cases where your Chrysler 200 has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function effectively. Luckily for you this operation is extremely simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take off the destroyed parking sensor from your Chrysler 200, this stage is fairly intuitive, it is just clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Chrysler 200

    Now we move on to the section you’re probably most focused on, how to install a reverse sensor set up on a Chrysler 200 that doesn’t have one? As we said earlier on, you’re lucky because a good number of OEMs now sell aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this section. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will certainly have to remove the bumper of your Chrysler 200 for the set up, do not be reluctant to consult our article on this subject matter to discover the method to follow. If you don’t feel like it, you can call a workshop, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to follow the installation instructions, but we summarize here the main procedures.
    • Take off the bumper if you don’t have access to the inside of it.
    • Think about the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Chrysler 200

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Chrysler 200. There are two options, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation manual which is accessible with some electrical bases.
      • Determine the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Chrysler 200?

        Price of changing a faulty reversing parking sensor for an Chrysler 200

        The replacement of a broken reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is important to count approximately one hundred euros for the installation of the kit by a workshop.

        Price of an ultrasonic parking sensors with drilling for Chrysler 200

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high quality system.

        Price of a parking sensors kit without drilling for a Chrysler 200

        .
        Finally, for the price of a reversing radar without drilling for your Chrysler 200, no matter what type you go for, you will have to spend between 30 and 60 euros.

        To discover more tips on the Chrysler 200, take a look at the Chrysler 200 category.