Recent cars all come with an astounding number of features, however, resulting from your budget or the year of your Buick Lucerne, you may not be lucky enough to have them all. Today we’re going to help you solve this problem by detailing how to install parking sensor on my Buick Lucerne? In reality, this option is very practical, especially if you live in the city and have to park often in narrow parking areas. To help you out, we’ll first check out how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Buick Lucerne, and finally, how much does a parking sensor cost?

install-parking-sensors-buick-lucerne

How does parking sensors function on an Buick Lucerne?

So we commence with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting option permits you to know the distance between the back of your Buick Lucerne and an obstacle when you maneuver. It is therefore particularly good for drivers who have to maneuver often, whose field of vision is poor, or whose car size is large.
Often times installed as standard, the reverse sensors of a Buick Lucerne integrate a set of sensors (minimum 4) that will be activated with reverse gear and will sense obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and calculate the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will increase in level with the closeness of the obstacle and sometimes a visual marker in complement. The reversing radars of a Buick Lucerne will help you for parking, but also for security and avoiding pedestrians.

How to install parking sensors on a Buick Lucerne?

We now move on to the section that you are most likely most intrigued by, fitting reverse parking sensors on a Buick Lucerne. This part is for you if you don’t have a standard reserve sensor set up and you still want to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Buick Lucerne.

How to replace a broken backup sensors on a Buick Lucerne

First we’ll see how to replace a broken parking sensor on an Buick Lucerne. If it turns out your Buick Lucerne has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be swapped out to allow the system to function properly. Good thing for you this procedure is particularly simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take out the damaged parking sensor from your Buick Lucerne, this part is very intuitive, it is only clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s working properly.
  • How to install an aftermarket parking sensor kit on an Buick Lucerne

    Now we go forward to the part you’re most certainly most intrigued by, how to install a reverse sensor set up on a Buick Lucerne that doesn’t have one? As we explained above, you’re lucky because many of OEMs now offer auto aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these types in this section. It is required to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will surely have to remove the bumper of your Buick Lucerne for the installation, do not hesitate to browse our article on this subject matter to discover the process to follow. If you don’t feel like it, you can call a mechanic, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to stick to the installation instructions, but we summarize here the main simple steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Think about the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Buick Lucerne

      And finally, we will now present you the installation of a drill-free parking sensors system on a Buick Lucerne. There are two options, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Adhere to the installation instructions which is accessible with some electrical bases.
      • Find the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Buick Lucerne?

        Price of changing a broken reversing parking sensor for an Buick Lucerne

        The replacement of a destroyed reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is necessary to count approximately one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Buick Lucerne

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a good quality set up.

        Price of a parking sensors kit without drilling for a Buick Lucerne

        .
        Finally, for the price of a reversing radar without drilling for your Buick Lucerne, what ever version you select, you will have to spend among 30 and 60 euros.

        Whenever you have any additional questions about the Buick Lucerne, do not hesitate to consult our Buick Lucerne category.