Recent cars all come with an astounding number of options, nevertheless, by reason of your budget or the year of your Audi S3, you may not be sufficiently fortunate to have them all. On this page we’re gonna help you correct this issue by showing how to install parking sensor on my Audi S3? Indeed, this feature is extremely useful, especially if you live in the city and have to park often in narrow parking places. To help you out, we’ll first examine how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Audi S3, and at last, how much does a parking sensor cost?
How does parking sensors work on an Audi S3?
So we start with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting feature will allow you to know the distance between the back of your Audi S3 and an obstacle when you maneuver. It is consequently specifically honest for people who have to maneuver often, whose visibility is bad, or whose vehicle size is large.
Often times installed as standard, the reverse sensors of a Audi S3 incorporate a kit of sensors (minimum 4) that will be activated with reverse gear and will identify obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. Generally you will have a sound signal in the cabin which will increase in intensity with the proximity of the obstacle and in some cases a visual marker in complement. The reversing radars of a Audi S3 will help you for parking, but as well for safety and keeping away from pedestrians.
How to install parking sensors on a Audi S3?
We now proceed to the section that you are likely most intrigued by, installing reverse parking sensors on a Audi S3. This section is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Audi S3.
How to replace a damaged backup sensors on a Audi S3
First we’ll see how to replace a damaged parking sensor on an Audi S3. In the event that your Audi S3 has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be replaced to allow the system to function effectively. Luckily for you this process is really simple, you can even carry it out yourself without any specified mechanical skill:
- Get a replacement radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Take off the damaged parking sensor from your Audi S3, this step is very intuitive, it is only clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s functioning effectively.
- You will simply need to stick to the installation guidance, but we summarize here the main guidelines.
- Take off the bumper if you don’t have access to the inside of it.
- Think about the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it all out.
- Follow the installation manual which is accessible with some electrical knowledges.
- Identify the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Try it all out.
How to install an aftermarket parking sensor kit on an Audi S3
Now we move on to the section you’re quite likely most intrigued by, how to install a reverse sensor set up on a Audi S3 that doesn’t have one? As we revealed earlier on, you’re lucky because a good number of OEMs now deal automotive aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Audi S3 for the installation, do not be reluctant to read our article on this subject to learn the procedure to follow. If you don’t feel like it, you can call a mechanic, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Audi S3
And at last, we will now present you the installation of a drill-free parking sensors system on a Audi S3. There are two options, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take out. This sort of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Audi S3?
Price of changing a damaged reversing parking sensor for an Audi S3
The replacement of a broken reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is necessary to count around one hundred euros for the installation of the kit by a mechanic.
Price of an ultrasonic parking sensors with drilling for Audi S3
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable system.
Price of a parking sensors kit without drilling for a Audi S3
.
To conclude, for the price of a reversing radar without drilling for your Audi S3, what ever type you choose, you will have to spend among 30 and 60 euros.
To get more tips on the Audi S3, take a look at the Audi S3 category.
