Modern cars all come with an incredible quantity of features, however, due to your budget or the year of your Audi E-Tron, you may not be lucky enough to have them all. On this page we’re going to help you correct this issue by explaining how to install parking sensor on my Audi E-Tron? In fact, this feature is extremely handy, particularly if you live in the city and have to park frequently in narrow parking areas. To help you out, we’ll first view how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Audi E-Tron, and at last, how much does a parking sensor cost?

install-parking-sensors-audi-e-tron

How does parking sensors work on an Audi E-Tron?

So we commence with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature will allow you to know the distance between the back of your Audi E-Tron and an obstacle when you move back. It is as a consequence extremely legitimate for owners who have to maneuver frequently, whose visibility is mediocre, or whose vehicle size is huge.
Often times installed as standard, the reverse sensors of a Audi E-Tron is made up of a kit of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound warning in the cabin which will rise in strength with the closeness of the obstacle and in some models a visual marker in complement. The reversing radars of a Audi E-Tron will enable you for parking, but as well for safety and keeping away from pedestrians.

How to install parking sensors on a Audi E-Tron?

We now go forward to the part that you are almost certainly most intrigued by, fitting reverse parking sensors on a Audi E-Tron. This section is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy auto aftermarket parking sensors to install yourself on your Audi E-Tron.

How to replace a malfunctioning backup sensors on a Audi E-Tron

First we’ll see how to replace a malfunctioning parking sensor on an Audi E-Tron. If your Audi E-Tron has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be replaced to allow the system to function properly. Thankfully for you this operation is very simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take out the broken parking sensor from your Audi E-Tron, this part is fairly intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning properly.
  • How to install an aftermarket parking sensor kit on an Audi E-Tron

    Now we move on to the section you’re most likely most intrigued by, how to install a reverse sensor set up on a Audi E-Tron that doesn’t have one? As we said earlier on, you’re lucky because many of OEMs now offer auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will surely have to remove the bumper of your Audi E-Tron for the installation, do not hesitate to consult our article content on this subject to learn the method to follow. If you don’t feel like it, you can call a mechanic, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to adhere to the installation recommendations, but we summarize here the main steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Give it a try all out.
    • Install a parking sensor without drilling on a Audi E-Tron

      And at last, we will now present you the installation of a drill-free parking sensors system on a Audi E-Tron. There are two kind, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Adhere to the installation manual which is accessible with some electrical knowledges.
      • Identify the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Audi E-Tron?

        Price of changing a malfunctioning reversing parking sensor for an Audi E-Tron

        The replacement of a damaged reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is important to count around one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Audi E-Tron

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a good quality system.

        Price of a parking sensors kit without drilling for a Audi E-Tron

        .
        At last, for the price of a reversing radar without drilling for your Audi E-Tron, whatever type you choose, you will have to spend among 30 and 60 euros.

        If you have any additional questions about the Audi E-Tron, do not hesitate to consult our Audi E-Tron category.