You have dreams of going to the campsite with a caravan, you have a big garden and when you take care of it, a trailer will help you to empty the green waste, you are a craftsman and you wish to carry your gear, in all these circumstances, a hitch will be the fundamental element to have the ability to realising your projects. You are likely concerned about how to mount a trailer hitch on your Ds Ds 3? Our editors have made this article to make it less complicated for you to mount a trailer hitch. First we will look into the steps of how to mount a trailer hitch on a Ds Ds 3, then the electrical part with the connection of the harness.


How to mount hitch on my Ds Ds 3: Installation of the hitch trailer on the chassis

So we commence with the first part of the assembly of a trailer hitch, i.e. the installation part. This part will be cut into portions, with first the preparation, then the assembly and finally the few inspections to be carried out.

How to put a trailer hitch on a Ds Ds 3: Preparation of the assembly

Before you begin to install a towing hitch on your Ds Ds 3, you will need to accomplish a few steps to prepare the car for the installation of the hitch. Each car is designed to receive a towing system, and so is your car, however you will need access to it. To do this, you will need to remove the rear bumper, commonly there are a few nuts in the trunk, in the rear wheel arches and under the bumper, be sure you keep all the screws. Additionally to the bumper to put tow hitch on a Ds Ds 3, you must also remove the rear lights, because they can disturb you, and especially you will connect the power supply of the towbar to them.

How to mount a trailer hitch on my Ds Ds 3: Mounting the parts

The fitting of the hitch is not complicated by itself, just stick to the mounting information provided with your hitch kit. In most cases, you will just need to fix the main hitch bar to the cradle of your Ds Ds 3, commonly this step is done by fixing only 4 bolts on the sides of the main hitch bar. After this step, check that all your bolts are tightened correctly and only then will you have correctly finished the first step of How to mount a hitch on your Ds Ds 3.

How to install a hitch on my Ds Ds 3: Install the electrical harness

At last, the more complicated part commences now. Electricity is commonly not the most loved mission of professionals or budding handymen. You’ll still have to go through it because otherwise your trailer or caravan won’t have electricity and your lights, plate lights, or electrical components won’t work.

How to mount a hitch on my Ds Ds 3: Universal electrical harness

First probability of the second part of our article how to mount a hitch on your Ds Ds 3, the mounting of a universal wiring harness. These kits are actually less difficult to position than classic harnesses. Even so, make sure to select your harness as indicated by what you want to tow with your car hitch. If it is a caravan, you will need a 13-pin plug to transmit current inside it and if you only want to tow a trailer, a 7-pin plug will suffice.
For these harnesses, all you have to do is to recover the current from the connections of your rear lights, connect the ground to the body of your Ds Ds 3 and then connect the plug to the hitch. To finish, make sure to check that all your lights/indicators are operating after these connections.

How to mount a hitch on my Ds Ds 3: Classic wiring harness

If you don’t have a universal unit, we strongly suggest you to contact a mechanic for the electrical connection part. Actually, if you don’t have any knowledge in electricity, you risk missing a connection and losing time on this step which can be long. There you are, you now know how to mount a hitch on your Ds Ds 3, we hope you will have found all the information you were trying to find, if you have other questions or problems about your Ds Ds 3, do not hesitate to consult our catalogue of content articles about it.

To discover more tips on the Ds Ds 3, take a look at the Ds Ds 3 category.