You’re bored with listening to cassettes and only having the capacity to listent to the radio, while your phone is filled with your favourite music but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve created this content page to help you, because now you’re going to learn about how to install a car radio on your Volvo XC90. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Volvo XC90 and finally, how to connect it.
How to install car radio on Volvo XC90: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Volvo XC90, there is one fundamental task, take away the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two ways determined by the stereo that equips your Volvo XC90:
- Original car radio:
In this instance, you’ll have to be persistent, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Volvo XC90. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the technique is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volvo XC90: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Volvo XC90. Before you start, take some time to check the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Volvo XC90, once installed, make sure to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volvo XC90, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Volvo XC90, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you want more guides on the Volvo XC90, go to our Volvo XC90 category.
