You’re uninterested in listening to cassettes and only being able to listent to the radio, while your phone is filled with your favourite music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s precisely why we’ve written and published this content page to help you, because in this article you’re going to find out how to install a car radio on your Volvo V60. To achieve this, first we will find out how to remove the old car radio, then how to install a car radio on Volvo V60 and finally, how to connect it.

install-car-radio-volvo-v60

How to install car radio on Volvo V60: Removing the old car stereo

Before we start the serious business of how to install a car stereo on your Volvo V60, there is one fundamental task, remove the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two options based on the stereo that equips your Volvo V60:

  • Original car radio:
    In this case, you’ll have to be persistent, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Volvo V60. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections.
  • Aftermarket radio :
    In this situation the process is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Volvo V60: Fitting and connecting the car radio

Let’s go to the most important section for you, how to install a car stereo on your Volvo V60. Beforehand, take some time to examine the suitability of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various actions required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Volvo V60, once situated, remember to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volvo V60, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Volvo V60, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.

If you have any additional questions about the Volvo V60, do not hesitate to consult our Volvo V60 category.