You’re sick and tired of listening to cassettes and only having the capacity to listent to the radio, while your smartphone is loaded with your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve made this article to help you, because in this article you’re going to learn about how to install a car radio on your Volvo V50. To get this done, first we will see how to remove the old car radio, then how to install a car radio on Volvo V50 and to finish, how to connect it.
How to install car radio on Volvo V50: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Volvo V50, there is one important step, take away the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two methods based on the stereo that equips your Volvo V50:
- Original car radio:
In this case, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Volvo V50. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the method is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volvo V50: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Volvo V50. Beforehand, spend some time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Volvo V50, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volvo V50, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Volvo V50, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you have any further questions about the Volvo V50, do not hesitate to consult our Volvo V50 category.
