You’re sick and tired of listening to cassettes and only having the capacity to listent to the radio, while your phone is filled with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s precisely why we’ve posted this article content to help you, because in this article you’re going to find out how to install a car radio on your volvo v40. To do this, initially we will find out how to remove the old car radio, then how to install a car radio on volvo v40 and finally, how to connect it.
How to install car radio on volvo v40: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your volvo v40, there is one essential task, take off the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two methods determined by the stereo that equips your volvo v40:
- Original car radio:
In this instance, you’ll have to be patient, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your volvo v40. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your volvo v40: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your volvo v40. Beforehand, take some time to check the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your volvo v40, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your volvo v40, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on volvo v40, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If perhaps you have any additional questions about the volvo v40, do not hesitate to consult our volvo v40 category.
