You’re sick and tired of listening to cassettes and only having the capacity to listent to the radio, while your smartphone is filled with your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve created this article to help you, because right now you’re going to find out how to install a car radio on your Volvo S90. To achieve this, first we will discover how to remove the old car radio, then how to install a car radio on Volvo S90 and at last, how to connect it.
How to install car radio on Volvo S90: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Volvo S90, there is one essential task, take out the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two solutions determined by the stereo that equips your Volvo S90:
- Original car radio:
In this instance, you’ll have to be persistent, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Volvo S90. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this scenario the method is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volvo S90: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Volvo S90. Before you start, spend some time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Volvo S90, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volvo S90, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Volvo S90, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
Whenever you have any additional questions about the Volvo S90, do not hesitate to consult our Volvo S90 category.
